...
These are used by all Opmantek products (exception: NMIS does not use the addresses property). Only the first two, name and hostname host,are absolutely necessary properties.
...
| Property Name | Description |
|---|---|
| active | whether the node is active and handled by NMIS or should be ignored |
| collect | whether SNMP data should be collected from this node |
| ping | whether reachability statistics should be collected for this node |
| model | what type of device this is (default: "automatic") |
| version | snmpv1, snmpv2c or snmpv3; relevant only if collect is true |
| community | read-only community string for access using snmpv1 or snmpv2c |
| netType | wan or lan |
| roleType | core, access or distribution - the three layers of the Cisco three-layer hierarchical network model |
username | authentication and privacy parameters for SNMP Version 3 |
| port | which port to use for SNMP access (default: 161) |
| timezone | which timezone this system is in, numeric offset |
| webserver | whether the node runs a webserver. if true, a link to the node is presented in the NMIS GUI |
| threshold | whether thresholds are to be processed for this node |
| cbqos | whether Quality of Service data should be collected for this node (if the device and model support QoS) |
...