...
Product | Product Version | NMIS Version | MongoDB Version | Notes |
---|---|---|---|---|
opConfig | 2.2.0 | >= 8.5.0, <= 8.5.8G | 2.4 | opConfig 2.2.0 won't be able to report config changes to NMIS if you run it with NMIS 8.5.10G |
opConfig | 2.2.2, 2.2.4 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
opConfig | 3.0.0 | >= 8.5.10G | 2.4, 2.6 or 3.0 | To provide compatilibity with MongoDB 2.4 you have to set the configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis) |
opConfig | 3.0.3 | >= 8.5.10G | 2.6, 3.0 or 3.2 | |
opHA | 2.1.2 | >= 8.5.0, <= 8.5.8G | N/A | opHA 2.1.2 won't be able to transfer NMIS event statuses if you run it with NMIS 8.5.10G |
opHA | 2.1.4 | >= 8.5.10G | N/A | |
opExport | 1.6.7 | >= 8.5.0, <= 8.5.8G | N/A | |
opExport | 1.6.8 | >= 8.5.10G | N/A | |
opFlow | 2.5.1 | >= 8.5.0, <= 8.5.8G | 2.4 | |
opFlow | 2.5.2 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
opFlow | 3.0.0 - 3.0.5 | >=8.5.6 | 3.0 | WiredTiger storageEngine is HIGHLY recommended |
opFlow | 3.0.6 | N/A | 3.0 | NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. |
opFlow | 3.0.8 | N/A | 3.0 or 3.2 | NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. |
opFlow | 3.0.10 | N/A | 3.0 or 3.2 | NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. For remote integration opCharts >= 3.0.6 required |
opEvents | 1.2.4 | >= 8.5.0 | 2.4 | |
opEvents | 1.2.6, 2.0.0 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
opEvents | 2.0.2 | >= 8.5.10G | 2.6 or 3.0 | With MongoDB older than 2.6 the events table on the dashboard page will be empty. |
opEvents | 2.0.3 - 2.0.6 | >= 8.5.10G | 2.4, 2.6 or 3.0 | To provide compatilibity with MongoDB 2.4 you have to set the configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis ) |
opEvents | 2.2.0, 2.2.1 | >= 8.5.10G | 2.6, 3.0 or 3.2 | |
opReports | 3.0.2 - 3.0.8 | >= 8.5.0 | N/A | |
opReports | 3.0.10, 3.0.12 | >=8.6.0 | N/A | Display names are not supported if you use older versions of NMIS |
opCharts | 2.4.12 | >= 8.5.6G | N/A | |
opCharts | 2.6.2 | >= 8.5.6G | N/A | opCharts works best with NMIS 8.5.10G |
opCharts | 3.0.0 - 3.0.7 | >= 8.5.6G | 2.6 or 3.0 | opCharts works best with NMIS 8.5.10G or newer |
opCharts | 3.0.8 | >= 8.5.10G | 2.6, 3.0 or 3.2 | |
opTrend | 1.2.1 | >= 8.5.6G, <= 8.5.8G | 2.4 | opTrend's config be disabled if you run this version with NMIS 8.5.10G |
opTrend | 1.2.3 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
opAddress | 1.0.4 | > 8.5.0 | 2.4 | |
opAddress | 1.0.5 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
opMaps | 2.2.1 | >= 8.4.8G | N/A | Works with any NMIS running .nmis files, i.e. if use_json is nonexistent or set to false |
opMaps | 2.2.4 | >= 8.5.0G | N/A |