The UPS Configured Models Report displays UPS models configured under 'report_ups_configured_models' in opCommon.nmis configuration file.
Setup:
Firstly edit /path/to/omk/conf/opCommon.nmis setting 'report_ups_configured_models' which has the following default setting - only configured UPS models will be displayed:
| Code Block |
|---|
'report_ups_configured_models' => {
'POWERALERT-APC' => {
'exclude_nodegraphs_in_this_report_type' => 'health,upspwr,upsbattemp'
},
'POWERALERT-ups' => {
'exclude_nodegraphs_in_this_report_type' => 'health,upspwr,upsbattemp'
}
}, |
...
The report will include graphtype health if health is removed from exclude_nodegraphs_in_this_report_type.
exclude_nodegraphs_in_this_report_type => undef will cause all available graphtypes to be displayed.
The above configuration setting need only be done once to configure the UPS models to be returned.
Choose Then choose UPS Configured Models ReportunderCreate New Report >> General >> Type:
...