...
Firstly edit /path/to/omk/conf/opCommon.nmis setting report_ups_configured_modelswhich has the following default setting.
This configuration setting need only be set once as needed to configure the UPS models to be returned in the report.
The following are the following default settings:
| Code Block |
|---|
'report_ups_configured_models' => {
'POWERALERT-APC' => {
'exclude_nodegraphs_in_this_report_type' => 'health,upspwr,upsbattemp'
},
'POWERALERT-ups' => {
'exclude_nodegraphs_in_this_report_type' => 'health,upspwr,upsbattemp'
}
}, |
...