...
opReports currently offers 22 columns of information in the QoS report for Cisco devices:
1: Device
2: Interface
3: Speed
4: Speed In
5: Speed Out
6: Description
7: Input Utilisation (not a column in HTML report where it is reported in in the Interface heading section)
8: Output Utilisation (not a column in HTML report where it is reported in in the Interface heading section)
9: Direction
10: Policy Name
11: Action
12: Bandwidth
13: Percent
14: PrePolicyUtil
15: PostPolicyUtil
16: MaxPrePolicyUtil
17: PrePolicyBits
18: MaxPrePolicyBits
19: DropBits
20: MaxDropBits
21: PostPolicyBits
22: MaxPostPolicyBits
23: PrePolicyPkt
24: DropPkt
25: NoBufDropPkt
26: Drop Condition (not a column in HTML report where it is reported as a status color on in a relevant column)
27: Low Util Condition (not a column in HTML report where it is reported as a status color on in a relevant column)
28: High Util Condition (not a column in HTML report where it is reported as a status color on in a relevant column)
For Huawei devices the information in the QoS report can be provided per Interface and QoS Policy Name as follows:
1: Device
2: Interface
3: Speed
4: Speed In
5: Speed Out
6: Description
7: Input Utilisation (not a column in HTML reportreport where it is reported in the Interface heading section)
8: Output Utilisation (not a column in HTML report where it is reported in the Interface heading section)
9: Direction
10: Policy Name
11: Action (will always be 'Bandwidth')
12: Bandwidth (cannot be provided: will be 'N/A')
13: Percent (cannot be provided: will be 'N/A')
14: PrePolicyUtil (derived from OID hwCBQoSPolicyStatClassifierMatchedBytes)
15: PostPolicyUtil (derived from OID hwCBQoSPolicyStatClassifierMatchedPassBytes)
16: MaxPrePolicyUtil (derived from OID hwCBQoSPolicyStatClassifierMatchedBytes)
17: PrePolicyBits (derived from OID hwCBQoSPolicyStatClassifierMatchedBytes)
18: MaxPrePolicyBits (derived from OID hwCBQoSPolicyStatClassifierMatchedBytes)
19: DropBits (derived from OID hwCBQoSPolicyStatClassifierMatchedDropBytes)
20: MaxDropBits (derived from OID hwCBQoSPolicyStatClassifierMatchedDropBytes)
21: PostPolicyBits (derived from OID hwCBQoSPolicyStatClassifierMatchedPassBytes)
22: MaxPostPolicyBits (derived from OID hwCBQoSPolicyStatClassifierMatchedPassBytes)
23: PrePolicyPkt (derived from OID hwCBQoSPolicyStatClassifierMatchedPackets)
24: DropPkt (derived from OID hwCBQoSPolicyStatClassifierMatchedDropPackets)
25: NoBufDropPkt (cannot be provided: will be 'N/A')
26: Drop Condition (not a column in HTML report where it is reported as a status color on in a relevant column)
27: Low Util Condition (not a column in HTML report where it is reported as a status color on in a relevant column)
28: High Util Condition (not a column in HTML report where it is reported as a status color on in a relevant column)
For Teldat devices the information in the QoS report can be provided per Interface and QoS Policy Index as follows:
1: Device
2: Interface
3: Speed
4: Speed In
5: Speed Out
6: Description
7: Input Utilisation (not a column in HTML report where it is reported as a status color on a relevant columnin the Interface heading section)
8: Output Utilisation (not a column in HTML report where it is reported as a status color on a relevant columnin the Interface heading section)
9: Direction (will always be 'outbound')
10: Policy Name (derived from OID telProdNpMonFeatQosIndexClass: an index value that is an integer as there is no class name OID)
11: Action (will always be 'Bandwidth')
12: Bandwidth (cannot be provided: will be 'N/A')
13: Percent (cannot be provided: will be 'N/A')
14: PrePolicyUtil (derived from OID telProdNpMonFeatQosAccByt)
15: PostPolicyUtil (cannot be provided: will be 'N/A')
16: MaxPrePolicyUtil (derived from OID telProdNpMonFeatQosAccByt)
17: PrePolicyBits (derived from OID telProdNpMonFeatQosAccByt)
18: MaxPrePolicyBits (derived from OID telProdNpMonFeatQosAccByt)
19: DropBits (cannot be provided: will be 'N/A')
20: MaxDropBits (cannot be provided: will be 'N/A')
21: PostPolicyBits (cannot be provided: will be 'N/A')
22: MaxPostPolicyBits (cannot be provided: will be 'N/A')
23: PrePolicyPkt (derived from OID telProdNpMonFeatQosAccPkt)
24: DropPkt (cannot be provided: will be 'N/A')
25: NoBufDropPkt (cannot be provided: will be 'N/A')
26: Drop Condition (not a column in HTML report where it is reported as a status color on in a relevant column) (cannot be provided: will be 'N/A')
27: Low Util Condition (not a column in HTML report where it is reported as a status color on in a relevant column)
28: High Util Condition (not a column in HTML report where it is reported as a status color on in a relevant column)