Page History

...

• ABI 1 (NMIS 8)
  • In omk/conf/opCommon.nmis:
    • omkd_workers is set at 10 by default. Try reducing this number to 2 and then restart the omkd service.
      If you THEN find YOU need more omkd_workers, increment this value by one and test again until you get to a suitable value for omkd_workers
    • /omkd/omkd_max_requests: 100 to 500 (start at 100 and increase from this value if needed)
      
      
• ABI 2 (NMIS 9)
  • In omk/conf/opCommon.json:
    • omkd_workers is set at 10 by default. Try reducing this number to 2 and then restart the omkd service.
      If you THEN find YOU need more omkd_workers, increment this value by one and test again until you get to a suitable value for omkd_workers
    • /omkd/omkd_max_requests: 100 to 500 (start at 100 and increase from this value if needed)
  • in nmis9/conf/Config.nmis:
    • /system/nmisd_worker_max_cycles: 100
      
      
• Consider installing and using zswap, with its default settings, provided the server has more than 1GB RAM:
  • Please read https://www.kernel.org/doc/html/latest/vm/zswap.html where it is provided that:
    • Overcommitted guests that share a common I/O resource can dramatically reduce their swap I/O pressure, avoiding heavy handed I/O throttling by the hypervisor.
      This allows more work to get done with less impact to the guest workload and guests sharing the I/O subsystem.
    • Users with SSDs as swap devices can extend the life of the device by drastically reducing life-shortening writes.
  • Please read Performance Analysis of Compressed Caching Technique where it is provided that
    • during the testing procedure LZO (default) algorithm was used for compression and maximum pool percent was set to 20; and
    • see TABLE I. EFFICIENCY OF ZSWAP MODULE FOR VARIOUS SIZES OF RAM to estimate the extra headroom using zswap with default settings should provide:
      • From this paper we get that a server with 6GB RAM achieves above 68% efficiency, from which it can be interpreted that the 6GB RAM behaves as if it were 10GB RAM.
        • Be aware though that this is no free lunch: Zswap will use cpu in achieving these gains, so monitoring cpu usage is essential when installing and enabling zswap.
  • Don't be tempted to increase maximum pool percent from the default setting of 20: this will affect performance adversely.
    
    

• The default MongoDB table type is wiredtiger.
  If your MongoDB installation is using table type wiredtiger, please read
  https://docs.mongodb.com/manual/reference/configuration-options/#storage.wiredTiger.engineConfig.cacheSizeGB
  
  
  • Consider setting cacheSizeGB appropriately taking into consideration the memory requirements of other processes running on this box.
    With default mongod settings, a box with 16GB memory will most probably be currently set to use more than 7GB of memory for cacheSizeGB.
    
    This may be too much considering the box may be running NMIS, OMK and other applications too.
    • Check how much memory mongod is using for this cache at /var/log/mongodb/mongod.log:  search for cache_size where it is provided in MB, for example:
      • STORAGE [initandlisten] wiredtiger_open config: create,cache_size=7414M
        cacheSizeGB is set in GB, so a cache_size of 7414M is equivalent to the following setting in /etc/mongod.conf:
        • storage:
          • wiredTiger:
            • engineConfig:
              • cacheSizeGB: 7.24
                
                
    • Example where 60% was decided as the ratio that should be used to compute MongoDB cacheSizeGB on a VM with 8GB memory:
      • MONGO_USAGE=0.6
      • TOTAL_MEM=$(cat /proc/meminfo| grep -iF "memtotal" | awk '{print $2}')
        • returns TOTAL_MEM=7673702.4 (KB)
      • MONGO_MEM=$(echo "(${TOTAL_MEM} / (1024 * 1024)) * ${MONGO_USAGE}" | bc -l)
        • returns MONGO_MEM=4.390927734375 (GB)
      • MONGO_MEM=$(printf "%.2f" "${MONGO_MEM}")
        • returns  MONGO_MEM=4.39 (GB)
      • CACHE_MEM_FINAL=$(echo "((${MONGO_MEM} -1) * 0.5) / 1" | bc -l)
        • returns CACHE_MEM_FINAL=1.695 (GB)
      • CACHE_MEM_FINAL=$(printf "%.2f" "${CACHE_MEM_FINAL}")
        • returns CACHE_MEM_FINAL=1.70 (GB)
      • https://docs.mongodb.com/manual/reference/configuration-options/#storage-options
        IF CACHE_MEM_FINAL < 0.25 (GB) THEN CACHE_MEM_FINAL = 0.25 (GB)
      • echo $CACHE_MEM_FINAL
        • 1.7
      • Set cacheSizeGB to 1.7

...