Versions Compared

Old Version 39

changes.mady.by.user Alexander Zangerl

Saved on

compared with

New Version Current

changes.mady.by.user Mark Unwin

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The table below describes which combinations of Opmantek products are tested and work well with what versions of NMIS 9 and MongoDB.Please note that MongoDB 3.6 is not supported by Opmantek applications at this time. 

For earlier products please see Product Compatibility NMIS 8.

Table of Contents
maxLevel2

Image Added NMIS

...

NMIS Documentation

NMIS 9 Release Notes

NMIS 9 compatibility list: 
Anchor
NMIS
NMIS

Product

Product Version

NMIS Version

Image Added

MongoDB Version
(bold: recommended)

Operating 
Systems

Notes
opConfig
NMIS
 2
>= 9.
2
0.0
>= 8.5.0, <= 8.5.8G2.4

opConfig 2.2.0 won't be able to report config

changes to NMIS if you run it with NMIS 8.5.10G

opConfig2.2.2, 2.2.4>= 8.5.10G2.4, 2.6 or 3.0 - 3.4
 opConfig3.0.0>= 8.5.10G2.4, 2.6 or 3.0 - 3.4

To provide compatilibity with MongoDB 2.4 you have to set the

configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis)

opConfig3.0.3, 3.0.4>= 8.5.10G2.6, 3.0 - 3.4 opHA2.1.2>= 8.5.0, <= 8.5.8GN/A

opHA 2.1.2 won't be able to transfer NMIS event statuses

if you run it with NMIS 8.5.10G

opHA2.1.4>= 8.5.10GN/A opExport1.6.7>= 8.5.0, <= 8.5.8GN/A opExport1.6.8>= 8.5.10GN/A opFlow2.5.1>= 8.5.0, <= 8.5.8G2.4 opFlow2.5.2>= 8.5.10G2.4, 2.6, 3.0 - 3.4 opFlow3.0.0 - 3.0.5>=8.5.63.0 - 3.4WiredTiger storageEngine is HIGHLY recommendedopFlow3.0.6N/A3.0 - 3.4NMIS is optional. WiredTiger storageEngine is HIGHLY recommended.opFlow3.0.8N/A3.0 - 3.4NMIS is optional. WiredTiger storageEngine is HIGHLY recommended.opFlow3.0.10N/A3.0 - 3.4NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. For remote integration opCharts >= 3.0.6 requiredopFlowSP3.0.2N/A3.0 - 3.4NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. For local opCharts button to agent/interface version >= 3.0.10 is requiredopEvents1.2.4>= 8.5.02.4 opEvents1.2.6, 2.0.0>= 8.5.10G2.4, 2.6, 3.0 - 3.4 opEvents2.0.2>= 8.5.10G2.6, 3.0 - 3.4With MongoDB older than 2.6 the events table on the dashboard page will be empty.opEvents2.0.3 - 2.0.6>= 8.5.10G2.4, 2.6, 3.0 - 3.4To provide compatilibity with MongoDB 2.4 you have to set the
configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis)opEvents2.2.0 - 2.4.0>= 8.5.10G2.6, 3.0 - 3.4 opReports3.0.2 - 3.0.8>= 8.5.0N/A opReports3.0.10 - 3.0.14>=8.6.0N/ADisplay names are not supported if you use older versions of NMISopReports3.1.0>=8.6.2N/A opCharts2.4.12>= 8.5.6GN/A opCharts2.6.2>= 8.5.6GN/AopCharts works best with NMIS 8.5.10GopCharts3.0.0 - 3.0.7>= 8.5.6G2.6, 3.0 - 3.4opCharts works best with NMIS 8.5.10G or neweropCharts3.0.8>= 8.5.10G2.6, 3.0 - 3.4 opCharts3.0.10>= 8.5.10G2.6, 3.0 - 3.4 opCharts3.2.0>= 8.5.10G3.0 - 3.4At and above opCharts 3.2 Mongo 3 is requiredopCharts3.2.4>= 8.6.23.0 - 3.4 opTrend1.2.1>= 8.5.6G,
<= 8.5.8G2.4

opTrend's config optrend_process_condition_in_nmis must

be disabled if you run this version with NMIS 8.5.10G

opTrend1.2.3>= 8.5.10G2.4, 2.6, 3.0 - 3.4 opAddress1.0.4> 8.5.02.4 opAddress1.0.5>= 8.5.10G2.4, 2.6, 3.0 - 3.4 opMaps

2.2.1

>= 8.4.8G

N/AWorks with any NMIS running .nmis files, i.e. if use_json is nonexistent or set to false
opMaps2.2.4>= 8.5.0GN/A
3.4, 3.6
  • Debian 9, 10
  • Ubuntu 18, 20
  • CentOS 7*
  • RHEL 7
  • RHEL 8

RHEL 8 is supported from NMIS version 9.2.1

If install of NMIS 9 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS:

sudo yum install -y perl-CPAN;
sudo yum install -y perl-App-cpanminus;
sudo cpanm WWW::Mechanize --sudo --notest;



NMIS>= 9.4.03.4, 3.6, 4.2
NMIS>=9.4.43.4, 3.6, 4.2
  • Debian 10
  • Debian 11
  • Mint 21.01
  • RedHat 8.7
  • Rocky 8.7
  • Ubuntu 22.04
  • Ubuntu 23.04
OS's supported prior are also still supported in NMIS9 9.4.4

Release 9.0.4 of NMIS introduces the smarter non-interactive installation mode.

*CentOS 8 support has been withdrawn due to CentOS 8 being end of maintenance on 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.centos.org/About/Product

 Opmantek Installer

...

Some notes that are common for all Opmantek Applications: 

  • The Opmantek installer can be preseeded before the installer is invoked.
  • On CentOS and RHEL, always check the status of firewalld and selinux when unable to connect via http|https. During the installation, the installer prompts to disable selinux.


Image Added Open-AudIT

...

Open-AudIT Documentation

ProductProduct VersionDatabase

Operating
Systems

Notes
Open-AudIT>= 5.0MariaDB
  • Windows Server 2016 and up (not compatible with Windows 10)
  • RHEL 8 and 9
  • Debian 11 and 12
  • Ubuntu 20.04 and 22.04

64bit systems only. More information.



Image Added opConfig

...

opConfig Documentation

opConfig Release Notes

opConfig 4.X compatibility list: 

ProductProduct Version

NMIS Version

Image Added

MongoDB Version
(bold: recommended)		Notes
opConfig>= 4.0.0>= 9.0.0 3.4

NMIS needs to be installed but doesn't need to be running. 

Please check the opConfig 4 release notes for a specific NMIS minor version requirement. 

opConfig>= 4.1.1>= 9.1.03.4
opConfig>= 4.3.0>= 9.2.43.4, 3.6

opConfig

>= 4.4.0>= 9.4.03.4, 3.6, 4.2

Status
colourYellow
title!
 For a list of compatible Operating Systems please check the NMIS version compatibility list. 

Image Added opHA

...

opHA Documentation

opHA Release Notes

opHA 3.X Compatibility list: 

ProductProduct Version

NMIS Version

Image Added

MongoDB Version
(bold: recommended)		Notes
opHA>= 3.0.0 >= 9.0.03.4

Please check the opHA 3 release notes for a specific NMIS minor version requirement. 

opHA>= 3.1.2>= 9.1.03.4
opHA>= 3.4.0>= 9.2.43.4, 3.6
opHA

>= 3.5.0

>= 9.4.03.4, 3.6, 4.2

Status
colourYellow
title!
 For a list of compatible Operating Systems please check the NMIS version compatibility list. 

Image Added opEvents

...

opEvents Documentation

opEvents Release Notes

opEvents 3.X, 4.X Compatibility list: 

ProductProduct Version

NMIS Version

Image Added

MongoDB Version
(bold: recommended)		Notes
opEvents>= 3.0.0 >= 9.0.03.4

opEvents 3.X

NMIS needs to be installed but doesn't need to be running. 

Please check the opEvents 3 Release Notes for a specific NMIS minor version requirement. 

opEvents>= 3.1.0>= 9.1.03.4
opEvents>= 4.1.0>= 9.2.43.4, 3.6

opEvents 4.X

NMIS needs to be installed but doesn't need to be running. 

Please check the opEvents 4 Release Notes for a specific NMIS minor version requirement. 

opEvents>= 4.2.0>= 9.4.03.4, 3.6, 4.2

Status
colourYellow
title!
 For a list of compatible Operating Systems please check the NMIS version compatibility list. 

Image Added opCharts

...

opCharts Documentation

opCharts Release Notes

opCharts 4.X Compatibility list: 

ProductProduct Version

NMIS Version

Image Added

MongoDB Version
(bold: recommended)		Notes
opCharts>= 4.0.0>= 9.0.03.4

Please check the opCharts 4 release notes for a specific NMIS minor version requirement. 

opCharts>= 4.1.3>= 9.1.03.4
opCharts>= 4.3.0>= 9.2.43.4, 3.6
opCharts>= 4.4.0>= 9.4.03.4, 3.6, 4.2

Status
colourYellow
title!
 For a list of compatible Operating Systems please check the NMIS version compatibility list. 

Image Added opReports

...

opReports Documentation

opReports Release Notes

opReports 4.X Compatibility list: 

ProductProduct Version

NMIS Version

Image Added

MongoDB Version
(bold: recommended)		Notes
opReports>= 4.0.0 >= 9.0.11N/A

Please check the opReports release notes for a specific NMIS minor version requirement. 

opReports>= 4.1.1>= 9.1.0N/A
opReports>= 4.3.0>= 9.2.4N/A
opReports>= 4.4.0>= 9.4.0N/A

Status
colourYellow
title!
 For a list of compatible Operating Systems please check the NMIS version compatibility list. 

Image Added opAddress

...

opAddress Documentation

opAddress Release Notes

opAddress 2.X Compatibility list: 

ProductProduct Version

NMIS Version

Image Added

MongoDB Version
(bold: recommended)		Notes
opAddress>= 2.0.0>= 9.2.13.0 - 3.4
opAddress>= 2.1.0>= 9.2.43.4, 3.6
opAddress>= 2.2.0>= 9.4.03.4, 3.6, 4.2

Status
colourYellow
title!
 For a list of compatible Operating Systems please check the NMIS version compatibility list.