The table below describes which combinations of Opmantek products are tested and work well with what versions of NMIS 9 and MongoDB.Please note that MongoDB 3.6 is not supported by Opmantek applications at this time
For earlier products please see Product Compatibility NMIS 8.
Table of Contents | ||||
---|---|---|---|---|
|
NMIS
...
NMIS Documentation.
NMIS 8 compatibility list:
...
NMIS Version
...
Operating
Systems
...
- Debian 7, 8
- Ubuntu 16
- CentOS 6, 7
NMIS 9 compatibility list:
Anchor | ||||
---|---|---|---|---|
|
Product | Product Version | MongoDB Version (bold: recommended) |
---|
Operating | Notes | ||
---|---|---|---|
NMIS | >= 9.0.0 | 3.4, 3.6 |
|
|
On Debian 8, a compatible version of MongoDB Perl Driver (version 1.2.3 or newer) cannot be installed, even when CPANM is used.
On Ubuntu 16.04, pre-installing cpanminus, MongoDB Perl Driver and Mojo::File allows for a clean install of NMIS9:
- apt-get install build-essential cpanminus;
- cpanm --sudo MongoDB;
- cpanm --sudo Mojo::File;
RHEL 8 is supported from NMIS version 9.2.1 If install of NMIS 9 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS:
| ||||
NMIS | >= 9.4.0 | 3.4, 3.6, 4.2 | ||
NMIS | >=9.4.4 | 3.4, 3.6, 4.2 |
| OS's supported prior are also still supported in NMIS9 9.4.4 |
Release 9.0.4 of NMIS introduces the smarter non-interactive installation mode.
...
*CentOS 8 support has been withdrawn due to CentOS 8 being end of maintenance on 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.centos.org/About/Product
Opmantek Installer
...
Some notes that are common for all Opmantek Applications:
- The Opmantek installer can be preseeded before the installer is invoked.
- On CentOS and RHEL, always check the status of firewalld and selinux when unable to connect via http|https. During the installation, the installer prompts for disable to disable selinux.
opConfig
opConfig Documentation.
Open-AudIT
...
Open-AudIT Documentation
Product |
---|
...
Product Version |
---|
Database |
---|
Operating |
---|
(bold: recommended)
Systems | Notes |
---|---|
Open-AudIT | >= |
5.0 |
opConfig 2.2.0 won't be able to report config
changes to NMIS if you run it with NMIS 8.5.10G
To provide compatilibity with MongoDB 2.4 you have to set the
configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis)
MariaDB |
| 64bit systems only. More information. |
opConfig
...
opConfig Documentation
opConfig 4.X compatibility list:
Product | Product Version | NMIS Version | MongoDB Version (bold: recommended) | Notes |
---|---|---|---|---|
opConfig | >= 4.0.0 | >= 9.0.0 | 3.4 | NMIS needs to be installed but doesn't need to be running. Please check the opConfig 4 release notes for a specific NMIS minor version requirement. |
Status | ||||
---|---|---|---|---|
|
opHA
opHA Documentation.
opHA 2.X Compatibility list:
...
NMIS Version
...
opHA 2.1.2 won't be able to transfer NMIS event statuses
if you run it with NMIS 8.5.10G
...
opConfig | >= 4.1.1 | >= 9.1.0 | 3.4 | |
opConfig | >= 4.3.0 | >= 9.2.4 | 3.4, 3.6 | |
opConfig | >= 4.4.0 | >= 9.4.0 | 3.4, 3.6, 4.2 |
opHA 3.X Compatibility list:
NMIS Version
(bold: recommended)
Status | ||||
---|---|---|---|---|
|
...
opHA
opEvents Documentation.
...
opHA Documentation
opHA 3.X Compatibility list:
Product | Product Version | NMIS Version | MongoDB Version (bold: recommended) | Notes |
---|
opHA | >= |
3. |
0 |
. |
0 | >= 9.0.0 | 3.4 | Please check the opHA 3 release notes for a specific NMIS minor version requirement. | |
opHA | >= 3.1.2 | >= 9.1.0 | 3.4 | |
opHA | >= 3 |
configuration option
db_use_v26_features
to "false" or 0 (in conf/opCommon.nmis
).4.0 | >= |
9. |
2. |
4 |
3. |
...
NMIS Version
(bold: recommended)
4, 3. |
...
6 | |
opHA |
>= 3.5.0 |
>= 9. |
4.0 | 3.4 |
NMIS needs to be installed but doesn't need to be running.
Please check the opConfig 4 release notes for a specific NMIS minor version requirement., 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
...
opEvents
opCharts Documentation.
...
opEvents Documentation
opEvents 3.X, 4.X Compatibility list:
Product | Product Version | NMIS Version | MongoDB Version (bold: recommended) | Notes |
---|
opEvents | >= |
3. |
0. |
0 | >= 9 |
.0.0 |
3. |
opCharts 4.X Compatibility list:
4 | opEvents 3.X NMIS needs to be installed but doesn't need to be running. Please check the opEvents 3 Release Notes for a specific NMIS minor version requirement. | |||
opEvents | >= 3.1.0 | >= 9.1.0 | 3.4 | |
opEvents | >= 4.1.0 | >= 9.2.4 | 3.4, 3.6 | opEvents 4.X NMIS needs to be installed but doesn't need to be running. Please check the opEvents 4 Release Notes for a specific NMIS minor version requirement. |
opEvents | >= 4.2 |
NMIS Version
(bold: recommended)
.0 | >= 9. |
4.0 | 3.4 |
, 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
...
opCharts
...
opReports opCharts Documentation.
opReports 3.X Compatibility list:
...
NMIS Version
...
opCharts
...
4.X Compatibility list:
Product | Product Version | NMIS Version | MongoDB Version (bold: recommended) | Notes |
---|
opCharts | >= 4.0. |
0 | >= 9.0. |
0 | 3.4 | Please check the |
opCharts 4 release notes for a specific NMIS minor version requirement. |
Status | ||||
---|---|---|---|---|
|
opFlow
opFlow Documentation
...
NMIS Version
...
opCharts | >= 4.1.3 | >= 9.1.0 | 3.4 | |
opCharts | >= 4.3.0 | >= 9.2.4 | 3.4, 3.6 | |
opCharts | >= 4.4.0 | >= 9.4.0 | 3.4, 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
Open Audit
Open Audit Documentation.
...
NMIS Version
...
Operative
Systems
...
- Windows 7 and up
- RedHat / CentOS 6 and up
- Debian 8 and up
- Ubuntu 14.04 and up
...
opReports
...
opReports Documentation
opReports 4.X Compatibility list:
opExport
opExport Documentation.
Product | Product Version | NMIS Version | MongoDB Version (bold: recommended) | Notes |
---|
opReports | >= |
4. |
0 |
.0 | >= 9.0.11 |
N/A |
Status | ||||
---|---|---|---|---|
|
opTrend
opTrend Documentation.
Please check the opReports release notes for a specific NMIS minor version requirement. | ||||
opReports | >= 4.1.1 | >= 9.1.0 | N/A | |
opReports | >= 4.3.0 | >= 9.2.4 | N/A | |
opReports | >= 4.4.0 | >= 9.4.0 | N/A |
NMIS Version
(bold: recommended)
<= 8.5.8G
opTrend's config optrend_process_condition_in_nmis
must
be disabled if you run this version with NMIS 8.5.10G
Status | ||||
---|---|---|---|---|
|
opAddress
...
opAddress Documentation
opAddress 2.X Compatibility list:
Product | Product Version | NMIS Version | MongoDB Version (bold: recommended) | Notes |
---|---|---|---|---|
opAddress |
>= 2.0. |
0 | > |
= 9.2.1 | 3.0 - 3 |
.4 | |
opAddress | >= 2.1.0 |
>= |
9. |
2. |
4 |
3.4, |
3.6 |
Status | ||||
---|---|---|---|---|
|
opMaps
opMaps Documentation.
opAddress | >= |
NMIS Version
(bold: recommended)
2.2. |
0 | >= |
9.4. |
use_json
is nonexistent or set to false0 | 3.4, 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
...
Operating Systems please check the NMIS version compatibility list.