Versions Compared

Old Version 6

changes.mady.by.user Mark Henry

Saved on

compared with

New Version Current

changes.mady.by.user Robin Twiggs

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Upgrading from any version of opReports 3.x is trivial: simply download and start the self-extracting installer and follow the prompts.

Upgrading from version 2.x

...

  • The individual performing this installation has a small bit of Linux experience.
  • Root access is available.
  • Internet access is required for installing any missing but required software packages.
  • NMIS (8.5.0 or newer) must already be installed on the same server that opReports is being installed on.
  • You will need a license for opReports (evaluation licenses are available here).
  • All licenses are added/updated at https://<hostname>/omk/opLicense .

Preparation

Installation Steps

As of February 2016, opCharts opReports is distributed in a self-extracting download format that simplifies the installation process quite a bit. More information on running the installer can be found HERE: The Opmantek Installer

...

  • Start the interactive installer and follow its instructions. The installer now fully covers both initial installations as well as upgrades from earlier versions of opReports.


     

    Code Block
    sudo sh ./opReports-Linux-x86_64-3.0.7.run
...
++++++++++++++++++++++++++++++++++++++++++++++++++++++
opReports (3.0.7) Installation script
++++++++++++++++++++++++++++++++++++++++++++++++++++++
...
This installer will install opReports into /usr/local/omk.
To select a different installation location please rerun the
installer with the -t option.


  • The installer will interactively guide you through the steps of installing opReports. Please make sure to read the on-screen prompts carefully.
  • When the installer finishes, opReports is installed into /usr/local/omk, and the default configuration files are in /usr/local/omk/conf, ready for your initial config adjustments.
  • A detailed log of the installation process is saved as /usr/local/omk/install.log, and subsequent upgrades or installations of other Opmantek products will add to that logfile.
  • For detailed information about the interactive installer please check the Opmantek Installer page.

Initial Setup

opReports works almost  completely "out of the box" and requires just a very few configuration settings to be adjusted initially:

...

If you want to run scheduled reports very frequently, then the default frequency for the opReports scheduler may be insufficient.
By default opReports installs a cron file (in /etc/cron.d/opreports) which runs opreports-scheduler.pl once per hour. Feel free to modify that cron file to your liking.