When resolving issues with NMIS, there are various outputs and logs which can assist the support and development teams with troubleshooting issues to determine root cause and a workaround or solution.
To collect those logs and related evidence for debugging you should also consider using The NMIS Support Tool.
Usually most useful output and most requested output is that from an nmis.pl collection and update for the node with issues. To generate this, the command is:
If we ask for a full dump <mib> would be “.1”, which is the full ISO tree, or we might ask for a specific branch, like “system” or “ifTable” for example.
If you need to diagnose RRD-related issues you may also want to make use of the Polling Log, which records exactly what is sent to RRDtool for storage.
Please note that this log can be filling up quite quickly, so you shouldn't leave it enabled any longer than necessary. The Polling Log is configured using the option
polling_log (in the files section of
Config.nmis), and it's inactive unless the file exists. The default file is
<nmis_logs>/polling.log and to activate this log you need to create the file, for example using touch:
cd /usr/local/nmis8 touch logs/polling.log
It is highly recommended that you deactivate the polling log once you are done with your diagnostics by simply deleting the polling log file.
Other logs are useful to see, but usually depending on the issue we would ask for this, but some handy logs to look at are: