Child pages
  • Collector / Server

Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents


Open-AudIT Enterprise provides a Collector Server or distributed solution (since the 2.0.6 release).

To understand the benefits and some background refer to the product information here:


Collector / Server is designed so that you can have a remote or 'collector'  instance of Open-AudIT running on a remote machine. That collector instance might be in another security zone, subnet, cloud hosting instance or at a customer site.  The remote collector is then doing all the discovering and auditing of devices locally avoiding networking and firewalling complexity.  The Collector once it has registered is completely controlled by the 'server'.  This means you only need an HTTPS connection from that Collector to the Server. 

Collector / Server is an Enterprise only feature. Enterprise customers receive one Collector license for free. Additional Collector license can be purchased as required.


The collector is essentially a full install of Open-AudIT in ‘collector’ mode. This mode would reduce visible functionality in an effort to simplify and focus the application. It is designed to collect information about networks. The collector is designed to run discovery upon the network it is situated in. It is not restricted to only that network, but ideally it would essentially be “one collector per subnet”. The collector is driven on a schedule by the server and runs discovery upon the network or ip address as specified. It can run all functions that a full Open-AudIT installation can run.

Once installed and setup, control of the Collector is performed on the Server.

The only required network ports between the collector and server are 80 or 443. The Open-AudIT database is not shared between these installs.

By default the collector will request from the server any discovery tasks every 15 minutes therefor any discovery tasks for the collector should be scheduled for 0, 15, 30 or 45 minutes.

Enabling Collectors

Please refer to the dedicated Collector server creation page

Example of Creating a discovery for the collector

On the server.

Add credentials as required. This is no different than credentials for discoveries run from the Server.

On the server.

Create a Discovery. 


Provide the network address of the Collector (e.g This is the network address used in discovery and should be where the target device submit their audits to, so the Collector's IP).

On the server.

Create a Task/Discovery Schedule (menu → Discover → Discoveries → Schedule Discoveries) or (menu → Admin → Tasks - Create Tasks ) . Choose the "Discovery" you just created, set "Type" to Discovery and "Collector" to the Collector you wish to run it on.   Set your minute for 0 and/or 15 and/or 30 and/or 45. Choose the required hour(s), day(s), etc. 

Credentials Create

Discoveries Create

Tasks Create

Once you have a working Collector and you have Discoveries and Tasks which use that Collector, the next time the Collector checks-in with the server, if a discovery is due to run for that Collector, it should run. The Collector should forward the details of any discovered devices to the Server.

More Information

Collectors and Orgs.

Credentials and Orgs.