...
- If you do not yet have a working installation of NMIS in your server, please follow the procedure in the NMIS 8 Installation Guide.
- Download opConfig from the Opmantek website.
- If you have opConfig 1.X installed please check the upgrade guide first.
Installation Steps
As of February 2016, opCharts is distributed in a self-extracting download format that simplifies the installation process quite a bit. More information on running the installer can be found HERE: The Opmantek Installer
Transfer the opConfig installer file onto the server in question, either by direct download from the Opmantek website, or from your desktop with scp or sftp or a similar file transfer tool.
The installer file is not needed after installation, hence root's home directory or /tmp are good locations to put it in.
Start the interactive installer and follow its instructions:
Code Block sudo sh ./opConfig-Linux-x86_64-3.0.7.run ... ++++++++++++++++++++++++++++++++++++++++++++++++++++++ opConfig (3.0.7) Installation script ++++++++++++++++++++++++++++++++++++++++++++++++++++++ ... This installer will install opConfig into /usr/local/omk. To select a different installation location please rerun the installer with the -t option.
- The installer will interactively guide you through the steps of installing opConfig. Please make sure to read the on-screen prompts carefully.
- When the installer finishes, opConfig is installed into
/usr/local/omk, and the default configuration files are in/usr/local/omk/conf, ready for your initial config adjustments. - A detailed log of the installation process is saved as
/usr/local/omk/install.log, and subsequent upgrades or installations of other Opmantek products will add to that logfile. - For detailed information about the interactive installer please check the Opmantek Installer page.
...