...
| Code Block |
|---|
|
'server_master' => 'true',
'auth_src_ip' => '192.168.88.11', |
Adding Slave Groups to Master
On each slave you will need to determine which groups are currently in use.
| Code Block |
|---|
|
[root@vali conf]# grep group_list /usr/local/nmis8/conf/Config.nmis
'group_list' => 'HQ,HQDev', |
This will result in a list of groups which need to be added to the NMIS Master, edit /usr/local/nmis8/conf/Config.nmis and add these groups to that list, this is a comma separated list.
| Code Block |
|---|
|
'group_list' => 'NMIS8,DataCenter,Branches,Sales,Campus,HeadOffice,HQ,HQDev', |
Test Master Collection
You can verify if the master is collecting data from the slaves by running this command
| Code Block |
|---|
|
[root@thor conf]# /usr/local/nmis8/bin/nmis.pl type=master debug=true
NMIS Copyright (C) 1999-2011 Opmantek Limited (www.opmantek.com)
This program comes with ABSOLUTELY NO WARRANTY;
This is free software licensed under GNU GPL, and you are welcome to
redistribute it under certain conditions; see www.opmantek.com or email
contact@opmantek.com
NMIS version 8.3.4G
14:00:33 nmisMaster, Running NMIS Master Functions
14:00:33 nmisMaster, Master, processing Slave Server vali
14:00:33 nmisMaster, Get loadnodedetails from vali
14:00:33 nmisMaster, Get sumnodetable from vali
14:00:34 nmisMaster, get summary8 from vali
14:00:34 nmisMaster, get summary16 from vali
[root@thor conf]#
|
Access opMaps Web Page
The default URL to access opMaps is http://nmis.domain.com/cgi-omk/opMaps
...