...
NET-SNMP is installed on the target server and the snmptrap command should be /usr/bin/snmptrap
Configuring opEvents to Send SNMP Traps
Configure the Script Action in EventActions.nmis
Before Configuring the Script Action
Where opEvents is installed, edit the file /usr/local/omk/conf/EventActions.nmis, locate the section called scripts. The default configuration file from /usr/local/omk/install includes this section:
| Code Block |
|---|
'script' => {
'traceroute_node' => {
arguments => '--max-hops=20 node.host',
exec => 'traceroute', # traceroute commonly isn't in /bin
output => 'save'
},
'ping_node' => {
arguments => '-c 5 node.host',
exec => '/bin/ping', # but ping usually is
output => 'save'
},
'ping_neighbor' => {
arguments => '-c 5 event.element',
exec => '/bin/ping',
output => 'save'
}
},
|
...
Adding the Script Action
We are going to be inserting the content below into that section.
...
| Code Block |
|---|
'send_snmptrap_poc' => {
arguments => '-v 2c -Ci -c OPMANTEK IP_ADDRESS_OF_TEMIP "" 1.3.6.1.4.1.4818.1.1 1.3.6.1.4.1.4818.2.1.1 s event._id 1.3.6.1.4.1.4818.2.1.2 s event.time 1.3.6.1.4.1.4818.2.1.3 s event.date 1.3.6.1.4.1.4818.2.1.4 s event.node 1.3.6.1.4.1.4818.2.1.5 s event.host 1.3.6.1.4.1.4818.2.1.6 s event.event 1.3.6.1.4.1.4818.2.1.7 s event.element 1.3.6.1.4.1.4818.2.1.8 s event.state 1.3.6.1.4.1.4818.2.1.9 s event.stateful 1.3.6.1.4.1.4818.2.1.10 s event.details 1.3.6.1.4.1.4818.2.1.11 s event.type 1.3.6.1.4.1.4818.2.1.12 s event.priority 1.3.6.1.4.1.4818.2.1.13 s event.level',
exec => '/usr/bin/snmptrap',
output => 'save'
},
|
After Configuring the Script Action
Once finished you will have a script section which looks like:
| Code Block |
|---|
'script' => {
'send_snmptrap_poc' => {
arguments => '-v 2c -Ci -c OPMANTEK IP_ADDRESS_OF_TEMIP "" 1.3.6.1.4.1.4818.1.1 1.3.6.1.4.1.4818.2.1.1 s event._id 1.3.6.1.4.1.4818.2.1.2 s event.time 1.3.6.1.4.1.4818.2.1.3 s event.date 1.3.6.1.4.1.4818.2.1.4 s event.node 1.3.6.1.4.1.4818.2.1.5 s event.host 1.3.6.1.4.1.4818.2.1.6 s event.event 1.3.6.1.4.1.4818.2.1.7 s event.element 1.3.6.1.4.1.4818.2.1.8 s event.state 1.3.6.1.4.1.4818.2.1.9 s event.stateful 1.3.6.1.4.1.4818.2.1.10 s event.details 1.3.6.1.4.1.4818.2.1.11 s event.type 1.3.6.1.4.1.4818.2.1.12 s event.priority 1.3.6.1.4.1.4818.2.1.13 s event.level',
exec => '/usr/bin/snmptrap',
output => 'save'
},
'traceroute_node' => {
arguments => '--max-hops=20 node.host',
exec => 'traceroute', # traceroute commonly isn't in /bin
output => 'save'
},
'ping_node' => {
arguments => '-c 5 node.host',
exec => '/bin/ping', # but ping usually is
output => 'save'
},
'ping_neighbor' => {
arguments => '-c 5 event.element',
exec => '/bin/ping',
output => 'save'
}
}, |
Configure an Action to Send SNMP Traps
Before Configuring the Policy
The default policy starts with a section 1, which is going to match any event.
| Code Block |
|---|
'policy' => {
'1' => {
IF => 'node.any and event.any',
THEN => {
'10' => {
IF => 'node.roleType eq "core" and event.event =~ "Down"',
THEN => 'priority(+3)',
BREAK => 'false'
},
'20' => {
IF => 'node.roleType eq "distribution" and event.event =~ "Down"',
THEN => 'priority(+2)',
BREAK => 'false'
},
'30' => {
IF => 'node.any and event.event eq "Node Down"',
THEN => 'script.traceroute_node() AND tag.isbroken(nodedown) AND tag.verybad(42)',
BREAK => 'false'
},
},
BREAK => 'false'
}, |
Adding the Policy
We are going to insert a new policy which will send an SNMP Trap for every event opEvents generates except for SNMP Traps which opEvents will generate.
The if statement here is is going to be TRUE if the contents of the event name (event.event) do NOT contain OPMANTEK-MIB
| Code Block |
|---|
'5' => {
IF => 'event.event !~ "OPMANTEK-MIB"',
THEN => 'script.send_snmptrap_poc()',
BREAK => 'false'
}, |
After Configuring the Policy
| Code Block |
|---|
'policy' => {
'1' => {
IF => 'node.any and event.any',
THEN => {
'5' => {
IF => 'event.event !~ "OPMANTEK-MIB"',
THEN => 'script.send_snmptrap_poc()',
BREAK => 'false'
},
'10' => {
IF => 'node.roleType eq "core" and event.event =~ "Down"',
THEN => 'priority(+3)',
BREAK => 'false'
}, |
Test the EventActions.nmis file
You can check the file by running the command perl -c EventActions.nmis, the result should be "syntax OK"
| Code Block |
|---|
[keiths@nmisdev64 conf]$ perl -c EventActions.nmis EventActions.nmis syntax OK |