The table below describes which combinations of Opmantek products are tested and work well with what versions of NMIS and MongoDB.
Product | Product Version | NMIS Version | MongoDB Version | Notes |
---|---|---|---|---|
opConfig | 2.2.0 | >= 8.5.0, <= 8.5.8G | 2.4 | opConfig 2.2.0 won't be able to report config changes to NMIS if you run it with NMIS 8.5.10G |
opConfig | 2.2.2 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
opConfig | 2.2.4 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
opHA | 2.1.2 | >= 8.5.0, <= 8.5.8G | N/A | opHA 2.1.2 won't be able to transfer NMIS event statuses if you run it with NMIS 8.5.10G |
opHA | 2.1.4 | >= 8.5.10G | N/A | |
opExport | 1.6.7 | >= 8.5.0, <= 8.5.8G | N/A | |
opExport | 1.6.8 | >= 8.5.10G | N/A | |
opFlow | 2.5.1 | >= 8.5.0, <= 8.5.8G | 2.4 | |
opFlow | 2.5.2 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
opEvents | 1.2.4 | >= 8.5.0 | 2.4 | |
opEvents | 1.2.6, 2.0.0, 2.0.2 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
opReports | 3.0.2 | >= 8.5.0 | N/A | |
opCharts | 2.4.12 | >= 8.5.6G | N/A | |
opTrend | 1.2.1 | >= 8.5.6G, <= 8.5.8G | 2.4 | opTrend's config be disabled if you run this version with NMIS 8.5.10G |
opTrend | 1.2.3 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
opAddress | 1.0.4 | > 8.5.0 | 2.4 | |
opAddress | 1.0.5 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
opMaps | 2.2.2 (broken), 2.2.1 (working) | compiled somewhere before NMIS 8.4.8G | Works with any NMIS running .nmis files that still uses -view files (uses them to get interface info, must be in .nmis format) |