Page History

...

[root@opmantek conf]# nmap 10.10.1.1

Starting Nmap 5.51 ( http://nmap.org ) at 2017-04-04 15:05 KST
Nmap scan report for 10.10.1.1
Host is up (0.011s latency).
Not shown: 998 closed ports
PORT   STATE SERVICE
22/tcp open  ssh
23/tcp open  telnet

Nmap done: 1 IP address (1 host up) scanned in 13.53 seconds
[root@opmantek conf]# 

Node Not Present in GUI

Example Case: 

Suddenly the node cannot be found in the GUI.  When attempting to re-add the node to NMIS via the GUI we receive a 'node already exists' error.

Issue: 

Something has become very corrupt, we need to purge NMIS of all relevant node configuration.

Actions: 

• Open /usr/local/nmis8/conf/Nodes.nmis with an editor and delete the section for the problem node.
• Remove the following files:
  • /usr/local/nmis8/var/<node-name>-node.josn
  • /usr/local/nmis8/var/<node-name>-view.json
• Re-add the problem node via the NMIS GUI
• Run the following commands:
  • /usr/local/nmis8/bin/nmis.pl type=update node=<node-name> force=true
  • /usr/local/nmis8/bin/nmis.pl type=collect node=<node-name> force=true

Verify

The problem node should now be functioning properly in the NMIS GUI.

Manual Update & Collect Actions

...