...
Code Block |
---|
++++++++++++++++++++++++++++++++++++++++++++++++++++++ Existing NMIS8 Installation detected ++++++++++++++++++++++++++++++++++++++++++++++++++++++ It seems that you have an existing NMIS installation in /usr/local/nmis8. The installer can upgrade the existing installation, or remove it and install from scratch. Do you want to take a backup of your current NMIS install? (RRD data is NOT included!) Type 'y' or <Enter> to accept, or 'n' to decline: y |
7.- ¿Desea El instalador realiza una interrogante para ver si se Desea actualizar la instalación existente?, ingresar la tecla Y para indicar que si.
Code Block |
---|
Do you want to upgrade the existing installation? If you say No here, the existing installation will be REMOVED and OVERWRITTEN! Type 'y' or <Enter> to accept, or 'n' to decline: y ++++++++++++++++++++++++++++++++++++++++++++++++++++++ Copying NMIS files... ++++++++++++++++++++++++++++++++++++++++++++++++++++++ Copying source files from /tmp/selfgz1986821441 to /usr/local/nmis8.. |
8.- Dar Enter para continuar
Code Block |
---|
You should check the NMIS Wiki for instructions on manual model upgrades: https://community.opmantek.com/x/-wd4 Hit <Enter> to continue: ++++++++++++++++++++++++++++++++++++++++++++++++++++++ Auto-upgradeable model files detected ++++++++++++++++++++++++++++++++++++++++++++++++++++++ |
9.- En este paso realiza la Migración de rrdrrds
Code Block |
---|
OK to run rrd migration script?
Type 'y' or <Enter> to accept, or 'n' to decline:
Running RRD migration script in test mode first... |
10.- La instalación ha finalizada.
Code Block |
---|
++++++++++++++++++++++++++++++++++++++++++++++++++++++
NMIS was Upgraded
++++++++++++++++++++++++++++++++++++++++++++++++++++++
Your NMIS installation has now been upgraded.
Please note that your existing configuration files were updated with new
configuration settings and some important default options were changed
(if you selected that option earlier), but all other settings
remain unchanged.
You may want to use the tools diffconfigs.pl, compare_models
and patch_config.pl (in /usr/local/nmis9/admin/) to detect differences between
the new defaults in /usr/local/nmis9/conf-default and your active configuration.
You will find more information in the release notes at
https://community.opmantek.com/display/NMIS/NMIS+Release+Notes
You should now be able to access NMIS at
http://<HOSTNAME_OR_IP>/nmis8
If your browser is running on the same machine as NMIS was
installed onto, this would be
http://localhost/nmis8/
++++++++++++++++++++++++++++++++++++++++++++++++++++++
installation complete.
++++++++++++++++++++++++++++++++++++++++++++++++++++++
You have mail in /var/spool/mail/root
|
11.- Una vez finalizada la instalación es necesario realizar una revisión de los servicios, módulos, GUI, colección de datos, para poder descartar cualquier comportamiento anormal de la herramienta.
Nota: Durante la instalación se realizan preguntas referentes a actualización de archivos, servicios o configuraciones, por lo que se debe de tener precaución al responder los cuestionamientos.
Este procedimiento esta sintetizado de forma que al momento de realizar la ejecución de una actualización sea los más fácil posible.