Pasos para instalar o actualizar un módulo de OPMANTEK
Como recomendación se debe contar con salida a internet, porque al hacer la instalación requiere paquetes de cpan que no se encuentran instalados/actualizados esos paquete intervienen en la funcionalidad de los módulos.
1.- Descargar el modulo.run que se desea instalar desde la página oficial de descarga https://opmantek.com/network-tools-download/
wget link_de_Descarga
En este caso se instalara la siguiente versión de NMIS: para eso accedemos a la siguiente liga: http://dl-nmis.opmantek.com/nmis8.6.2G.run
2.- Dar permisos de ejecución al modulo.run con el siguiente comando
chmod +x nmis8.6.8G.run
3.- Ejecutar el instalador nmis8.6.8G.run
[root@opmantek tmp]# ./nmis8.6.8G.run Verifying archive integrity... All good. Uncompressing NMIS Version 8.6.8G 100% ++++++++++++++++++++++++++++++++++++++++++++++++++++++ NMIS Installer ++++++++++++++++++++++++++++++++++++++++++++++++++++++
4.- Hará un diagnostico si existen paquetes faltantes, si es el caso instarlos con CPAN o YUM, de lo contrario se continua con la instalación.
5.- Se pregunta que si se desea iniciar la instalación o actualización para esto respondemos que si (y)
++++++++++++++++++++++++++++++++++++++++++++++++++++++ Checking Installation Target ++++++++++++++++++++++++++++++++++++++++++++++++++++++ The standard NMIS installation target is "/usr/local/nmis8". To install NMIS into a different directory please answer the question below with "no" and restart the installer with the argument site=<custom_dir>, e.g. ./install.pl site=/opt/nmis8 OK to start installation/upgrade to /usr/local/nmis8? Type 'y' or <Enter> to accept, or 'n' to decline:
6.- El instalador detecta una versión de NMIS y pregunta que se deseamos realizar una copia de seguridad.
++++++++++++++++++++++++++++++++++++++++++++++++++++++ Existing NMIS8 Installation detected ++++++++++++++++++++++++++++++++++++++++++++++++++++++ It seems that you have an existing NMIS installation in /usr/local/nmis8. The installer can upgrade the existing installation, or remove it and install from scratch. Do you want to take a backup of your current NMIS install? (RRD data is NOT included!) Type 'y' or <Enter> to accept, or 'n' to decline: y
7.- ¿Desea actualizar la instalación existente?
Do you want to upgrade the existing installation? If you say No here, the existing installation will be REMOVED and OVERWRITTEN! Type 'y' or <Enter> to accept, or 'n' to decline: y ++++++++++++++++++++++++++++++++++++++++++++++++++++++ Copying NMIS files... ++++++++++++++++++++++++++++++++++++++++++++++++++++++ Copying source files from /tmp/selfgz1986821441 to /usr/local/nmis8..
8.- Enter para continuar
You should check the NMIS Wiki for instructions on manual model upgrades: https://community.opmantek.com/x/-wd4 Hit <Enter> to continue: ++++++++++++++++++++++++++++++++++++++++++++++++++++++ Auto-upgradeable model files detected ++++++++++++++++++++++++++++++++++++++++++++++++++++++
9.- Migración de rrd
OK to run rrd migration script? Type 'y' or <Enter> to accept, or 'n' to decline: Running RRD migration script in test mode first...