The table below describes which combinations of Opmantek products are tested and work well with what versions of NMIS and MongoDB.
Product | Product Version | NMIS Version | MongoDB Version | Notes | ||
---|---|---|---|---|---|---|
opConfig | 2.2.0 | >= 8.5.0, <= 8.5.8G | 2.4 | opConfig 2.2.0 won't be able to report config changes to NMIS if you run it with NMIS 8.5.10G | ||
opConfig | 2.2.2 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |||
opHA | 2.1.2 | >= 8.5.0, <= 8.5.8G | N/A | opHA 2.1.2 won't be able to transfer NMIS event statuses if you run it with NMIS 8.5.10G | ||
opHA | 2.1.4 | >= 8.5.10G | N/A | |||
opExport | 1.6.7 | >= 8.5.0, <= 8.5.8G | N/A | |||
opExport | 1.6.8 | >= 8.5.10G | N/A | |||
opFlow | 2.5.1 | >= 8.5.0, <= 8.5.8G | 2.4 | |||
opFlow | 2.5.2 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |||
opEvents | 1.2.4 | >= 8.5.0 | 2.4 | |||
opEvents | 1.2.6 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |||
opReports | 3.0.2 | >= 8.5.0 | N/A | |||
opCharts | 2.4.12 | >= 8.5.6G | N/A | |||
opTrend | 1.2.1 | >= 8.5.6G, <= 8.5.8G | 2.4 | opTrend's config be disabled if you run this version with NMIS 8.5.10G | ||
opTrend | 1.2.3 | >= 8.5.10G | 2.4, 2.5 or 3.0 | |||
opAddress | 1.0.4 | > 8.5.0 | 2.4 | |||
opAddress | 1.0.5 | opConfig | 2.2.2 | >= 8.5.10G | 2.4, 2.6 or 3.0 |