Versions Compared

Old Version 2

changes.mady.by.user Mark Dueck

Saved on

compared with

New Version 3

changes.mady.by.user Mark Dueck

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Start the interactive installer and follow its instructions:

    Code Block
    sudo sh
./opFlow-Linux-x86_64-3.0.2.run

++++++++++++++++++++++++++++++++++++++++++++++++++++++
opFlow (3.0.2) Installation script
++++++++++++++++++++++++++++++++++++++++++++++++++++++

This installer will install opFlow into /usr/local/omk.
To select a different installation location please rerun the 
installer with the -t option.
...
  • The installer will interactively guide you through the steps of installing opFlow. Please make sure to read the on-screen prompts carefully.
  • When the installer finishes, opFlow is installed into /usr/local/omk, and the default configuration files are in /usr/local/omk/conf, ready for your initial config adjustments.
  • A detailed log of the installation process is saved as /usr/local/omk/install.log, and subsequent upgrades or installations of other Opmantek products will add to that logfile.
  • For detailed information about the interactive installer please check the Opmantek Installer page.

Initial Configuration

After installation you may need/want to change the directories that flows are stored in, the ports the flows are coming in on, etc.  Please read the sections below for more.

nfdump

nfdump uses, /etc/init.d/nfdump, e.g. service nfdump stop|stop|restart

...