The table below describes which combinations of Opmantek products are tested and work well with what versions of NMIS and MongoDB.
Please note that MongoDB 3.2 is not supported by Opmantek applications at this time.
| Product | Product Version | NMIS Version | MongoDB Version | Notes |
|---|---|---|---|---|
| opConfig | 2.2.0 | >= 8.5.0, <= 8.5.8G | 2.4 | opConfig 2.2.0 won't be able to report config changes to NMIS if you run it with NMIS 8.5.10G |
| opConfig | 2.2.2, 2.2.4 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
| opHA | 2.1.2 | >= 8.5.0, <= 8.5.8G | N/A | opHA 2.1.2 won't be able to transfer NMIS event statuses if you run it with NMIS 8.5.10G |
| opHA | 2.1.4 | >= 8.5.10G | N/A | |
| opExport | 1.6.7 | >= 8.5.0, <= 8.5.8G | N/A | |
| opExport | 1.6.8 | >= 8.5.10G | N/A | |
| opFlow | 2.5.1 | >= 8.5.0, <= 8.5.8G | 2.4 | |
| opFlow | 2.5.2 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
| opEvents | 1.2.4 | >= 8.5.0 | 2.4 | |
| opEvents | 1.2.6, 2.0.0 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
| opEvents | 2.0.2 | >= 8.5.10G | 2.6 or 3.0 | With MongoDB older than 2.6 the events table on the dashboard page will be empty. |
| opEvents | 2.0.3, 2.0.4, 2.0.5 | >= 8.5.10G | 2.4, 2.6 or 3.0 | To provide compatilibity with MongoDB 2.4 you have to set the configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis) |
| opReports | 3.0.2, 3.0.4, 3.0.6 | >= 8.5.0 | N/A | |
| opCharts | 2.4.12 | >= 8.5.6G | N/A | |
| opCharts | 2.6.2 | >= 8.5.6G | N/A | opCharts works best with NMIS 8.5.10G |
| opCharts | 3.0.0 | >= 8.5.6G | 2.6 or 3.0 | opCharts works best with NMIS 8.5.10G or newer |
| opTrend | 1.2.1 | >= 8.5.6G, <= 8.5.8G | 2.4 | opTrend's config be disabled if you run this version with NMIS 8.5.10G |
| opTrend | 1.2.3 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
| opAddress | 1.0.4 | > 8.5.0 | 2.4 | |
| opAddress | 1.0.5 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
| opMaps | 2.2.2 (broken), 2.2.1 (working) | compiled somewhere before NMIS 8.4.8G | Works with any NMIS running .nmis files that still uses -view files (uses them to get interface info, must be in .nmis format) |