The table below describes which combinations of Opmantek products are tested and work well with what versions of NMIS and MongoDB.
Please note that MongoDB 3.2 is not supported by Opmantek applications at this time.
| Product | Product Version | NMIS Version | MongoDB Version | Notes |
|---|---|---|---|---|
| opConfig | 2.2.0 | >= 8.5.0, <= 8.5.8G | 2.4 | opConfig 2.2.0 won't be able to report config changes to NMIS if you run it with NMIS 8.5.10G |
| opConfig | 2.2.2, 2.2.4 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
| opConfig | 3.0.0 | >= 8.5.10G | 2.4, 2.6 or 3.0 | To provide compatilibity with MongoDB 2.4 you have to set the configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis) |
| opHA | 2.1.2 | >= 8.5.0, <= 8.5.8G | N/A | opHA 2.1.2 won't be able to transfer NMIS event statuses if you run it with NMIS 8.5.10G |
| opHA | 2.1.4 | >= 8.5.10G | N/A | |
| opExport | 1.6.7 | >= 8.5.0, <= 8.5.8G | N/A | |
| opExport | 1.6.8 | >= 8.5.10G | N/A | |
| opFlow | 2.5.1 | >= 8.5.0, <= 8.5.8G | 2.4 | |
| opFlow | 2.5.2 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
| opFlow | 3.0.0 - 3.0.5 | >=8.5.6 | 3.0 | WiredTiger storageEngine is HIGHLY recommended |
| opFlow | 3.0.6, 3.0.8 | N/A | 3.0 | NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. |
| opEvents | 1.2.4 | >= 8.5.0 | 2.4 | |
| opEvents | 1.2.6, 2.0.0 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
| opEvents | 2.0.2 | >= 8.5.10G | 2.6 or 3.0 | With MongoDB older than 2.6 the events table on the dashboard page will be empty. |
| opEvents | 2.0.3 - 2.0.6 | >= 8.5.10G | 2.4, 2.6 or 3.0 | To provide compatilibity with MongoDB 2.4 you have to set the configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis) |
| opReports | 3.0.2 - 3.0.8 | >= 8.5.0 | N/A | |
| opReports | 3.0.10 | >=8.6.0 | N/A | Display names are not supported if you use older versions of NMIS |
| opCharts | 2.4.12 | >= 8.5.6G | N/A | |
| opCharts | 2.6.2 | >= 8.5.6G | N/A | opCharts works best with NMIS 8.5.10G |
| opCharts | 3.0.0 - 3.0.5 | >= 8.5.6G | 2.6 or 3.0 | opCharts works best with NMIS 8.5.10G or newer |
| opTrend | 1.2.1 | >= 8.5.6G, <= 8.5.8G | 2.4 | opTrend's config be disabled if you run this version with NMIS 8.5.10G |
| opTrend | 1.2.3 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
| opAddress | 1.0.4 | > 8.5.0 | 2.4 | |
| opAddress | 1.0.5 | >= 8.5.10G | 2.4, 2.6 or 3.0 | |
| opMaps | 2.2.2 (broken), 2.2.1 (working) | >= 8.4.8G | N/A | Works with any NMIS running .nmis files, i.e. if use_json is nonexistent or set to false |
| opMaps | 2.2.4 | >= 8.5.0G | N/A |