...
Step by step
1. Install nmis (if not already installed)
| Code Block | ||||
|---|---|---|---|---|
| ||||
bash ./nmis9-9.1X.1.run Y.run # read and answer the prompts, checking carefully the selections work for your environment. # NMIS does have good default selections and if you have tested those default selections before you can use -- -y to automatically select yes for all. # nmis9-9.1.1.run should be replaced with correct version you elect to run. |
2. Stop nmis8 and nmis9 from running
...
3. Replace the new default NMIS9 var/ and database/ directories for the old custom ones (NMIS8) by copying in the current data.
After migration you would consider removing the nmis8 directories and the old copies of the data.
| Code Block | ||
|---|---|---|
| ||
rm -rf /usr/local/nmis9/database rm -rf /usr/local/nmis9/var cp -rfTarfT /usr/local/nmis8/var /usr/local/nmis9/var cp -rfTarfT /usr/local/nmis8/database /usr/local/nmis9/database |
4. Download and run the Click here to download the import-nmis8-config.sh script and run it
| Code Block | ||
|---|---|---|
| ||
bash ./import-nmis8-config.sh |
...
| Code Block | ||
|---|---|---|
| ||
/usr/local/nmis9/bin/nmis-cli act=fixperms |
6. Lastly, start and verify nmis9d is running
| Code Block | ||
|---|---|---|
| ||
systemctl start nmis9d.service
systemctl status nmis9d.service |
...