opCharts enables you to schedule NMIS outages and add multiple Nodes or Interfaces, or a combination of both, to a single outage event. You can also schedule a one-time outage or a recurring event for the required Node or Interface on the opCharts page.
This document describes how you can schedule an
Introduction
...
outage using opCharts 4
...
Create Schedule outages in opCharts.
and above.
Creating a Scheduled Outage
- To schedule an outage on the opCharts page, from the menu, click Views
...
- > Scheduled Outages.
...
- On the Outages page that opens, click New Outage
...
- .
- Add a Description for the outage.
- Specify a Change ID for easy identification of the outage event.
You can schedule a one-time outage or a recurring event under Frequency.
Note Note: By default, NMIS collects the performance data during every outage event. You may choose to discard it by selecting the Discard Performance Data check box.
Under
...
- Node
- Interface
- If we select Node then we need to choose any Property from the dropdown as shown below:
...
- Search for Node value and select required node for outage.
...
Outage Window, specify the Start and End time for the outage.
Info Click the Common Time Formats link to know more about the time formats supported by Opmantek applications for parsing the start and end times.
- Under Node Selection, choose the Selector Type - the type of device this outage is being configured for - Node or Interface.
- In case of a Node, choose the Node Property.
- Select or enter the required Values. You can enter multiple Node Values (separated by commas) for the Property chosen.
- Select or enter the required Values. You can enter multiple Node Values (separated by commas) for the Property chosen.
- In case of an Interface, search for and select the Node.
- From the Property drop-down list, select the elements - Interface or Interface Regex.
- In case of Interface, select the required element (ex:
Vlan1
) - In case of Interface Regex, enter a valid regex pattern (
- In case of Interface, select the required element (ex:
- From the Property drop-down list, select the elements - Interface or Interface Regex.
- In case of a Node, choose the Node Property.
...
- ex:
vlan*
or^Vlan.*?$
- ex:
...
Note 1: We can select multiple Node values if we have same Property or add New selector to choose different Node Properties
Note 2: We can have a combination of both Node & Elements together by adding New Selectors separately in a single Scheduled Outage.
Fill out the other Outages information then click Save and Back.
Below are the fields and functions of the outage creation UI.
- )
- Click the Add new selector button to add another Node or Interface to the same Scheduled Outage.
- Click Save and Back to finish scheduling the outage.
...
How often the outage occurs (Once, Daily, Weekly, Monthly)
...
The type of device the outage is for (Node or Interface)
If selecting Interface then Search for Node & select
...
For Node you can select property made from the dropdown list.
For Interface it would be Interface or Interface Regex
...