You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 15 Next »

Installation Prerequisites

  • The individual performing this installation has some Linux experience.
  • NMIS8 is installed on the same server where opHA will be installed
  • NMIS8 is installed in /usr/local/nmis8
  • opHA will be installed into /usr/local/nmis8
  • Root access is available (not always needed but much easier)
  • Perl 5.10 
  • RRDtool 1.4.7
  • NMIS 8.3.3G or later
  • opHA will be installed onto the Master and each Slave NMIS server

Installation Steps

This step will be repeated for each NMIS master and slave server

  • Copy the opHA tarball to the slave or master NMIS server (a tarball is a GZIP'd tar file, e.g. opHA-1.1.tar.gz)
    1. You may need to use SCP or FTP to get the file onto the server.
  • The file will now likely be in the users home directory.
  • If the installation directory does not already exist
  • Change into the directory where the tarball was copied
  • Untar the file
cd ~
tar xvf ~/opHA-<version>.tar.gz
cd opHA/
cp install/Servers.nmis /usr/local/nmis8/conf/
cp cgi-bin/connect.pl /usr/local/nmis8/cgi-bin/ 
cp lib/NMIS/Connect.pm /usr/local/nmis8/lib/NMIS

/usr/local/nmis8/admin/fixperms.pl

 

opHA Slave Configuration

This configuration will be done on each NMIS Slave Server.  By default, the shared community for a slave is "secret" if you want to change this to something specific you can edit the NMIS Configuration item "slave_community" using your favourite text editor, edit this line and change secret to your desired opHA community string.

'slave_community' => 'secret',
'auth_src_ip' => '192.168.88.11',

Verify that the Apache user has been configured for master functions.  The default userid is "nmismst" and the file /usr/local/nmis8/conf/users.dat should include an entry like

nmismst:vnnFthCKoHsps

 

opHA Master Configuration

Adding Slaves to Servers.nmis

Once the slaves have been setup, you can configure the master with each of its slaves.  This is done by editing the file /usr/local/nmis8/conf/Servers.nmis, and adding a section for each server.

The default entries look like this:

'nmis1' => {
   'community' => 'secret',
   'name' => 'nmis1',
   'config' => 'Config.nmis',
   'protocol' => 'https',
   'port' => '443',
   'host' => 'nmis1.domain.com',
   'portal_protocol' => 'http',
   'portal_port' => '80',
   'portal_host' => 'nmis1.alternate.com',
   'cgi_url_base' => '/cgi-nmis8',
   'url_base' => '/nmis8',
   'user' => 'nmismst',
   'passwd' => 'C00kb00k'
 },
 'nmis2' => {
   'community' => 'secret',
   'name' => 'nmis2',
   'config' => 'Config.nmis',
   'protocol' => 'http',
   'port' => '80',
   'host' => '192.168.1.42',
   'portal_protocol' => 'http',
   'portal_port' => '80',
   'portal_host' => 'nmis2',
   'cgi_url_base' => '/cgi-nmis8',
   'url_base' => '/nmis8',
   'user' => 'nmismst',
   'passwd' => 'C00kb00k'  
 }

Edit the entry to look like this, in this example the hostname of the slave is "vali":

 'vali' => {
   'community' => 'YOURNAMEHERE',
   'name' => 'vali',
   'config' => 'Config.nmis',
   'protocol' => 'http',
   'port' => '80',
   'host' => 'vali',
   'portal_protocol' => 'http',
   'portal_port' => '80',
   'portal_host' => 'vali',
   'cgi_url_base' => '/cgi-nmis8',
   'url_base' => '/nmis8',
   'user' => 'nmismst',
   'passwd' => 'C00kb00k' 
 }

There are many options in this configuration but unless you are wanting to change the defaults considerably most of them will not matter.  If you wanted to use HTTPS to connect between the master and the slave, you could use https as the protocol and update the port accordingly.  You can use different user and passwd permissions here.

If you were presenting the Slave and needed to use an alternate connection, e.g. through a reverse proxy for presenting a portal, you would modify the portal_protocol, portal_port and portal_host accordingly.

Promoting NMIS to be a Master

By default, an NMIS server operates in standalone mode (which is also slave mode), to have NMIS behave in a masterly fashion, you will need to modify the configuration, so you can edit the NMIS Configuration item "sever_master" using your favourite text editor, edit this line and change from "false" to "true".

'server_master' => 'true', 
'auth_src_ip' => '192.168.88.11',

Access opMaps Web Page

The default URL to access opMaps is http://nmis.domain.com/cgi-omk/opMaps

Any authentication challenges will be the same as to login to your NMIS8 system.

  • No labels