Prerequisites
The individual performing this installation has some Linux experience.
Root level server access.
Pre-requisites are installed as per the RedHat/CentOS or Debian/Ubuntu guides.
NOTE - This guide is for a new install of Open-AudIT. If you wish to upgrade an existing installation, see the upgrade guide.
You should be able to determine the IP Address of your Open-AudIT server via the following command:
ifconfig | grep -Eo 'inet (addr:)?([0-9]*\.){3}[0-9]*' | grep -Eo '([0-9]*\.){3}[0-9]*' | grep -v '127.0.0.1'
This will be required later, so make a note of it now.
Installation Steps
All local commands should be run as root.
Copy the Open-AudIT tarball to the server (OAE-Linux-x86_64-1.0.4.tar.gz).
You may need to use SCP or FTP to get the file onto the server.
The file will now likely be in the users home directory.
Change into the /usr/local directory.
cd /usr/local
Untar the file.
tar xvf ~/OAE-Linux-x86_64-1.0.4.tar.gz
Fix the file ownership and permissions.
chown -R root:root omk chmod -R 775 omk chown -R root:www-data /usr/local/open-audit chmod -R 770 /usr/local/open-audit chmod -R 777 /usr/local/open-audit/code_igniter/application/views/lang/ chmod 770 /usr/local/open-audit/other/audit_linux.sh chmod 770 /usr/local/open-audit/other/audit_subnet.sh chmod 660 /usr/local/open-audit/other/open-audit.log
Change into the /usr/local/omk directory.
cd /usr/local/omk/
Install the daemon.
cp install/omkd.init.d /etc/init.d/omkd chkconfig --add omkd
Copy the config files.
cp install/users.dat conf/ cp install/oae_reports.json conf/ cp install/opCommon.nmis conf/
Edit the config files.
nano conf/opCommon.nmis
Edit the "openauditenterprise" section and insert the actual ip address of the server (not 127.0.0.1 or localhost) in to the oae_server variable (along with http:// and don't forget the trailing /). If you have Open-AudIT installed into a sub directory in your web root, be sure to add that to the end of the oae_server variable above. For our virtual appliance it would be http://<SERVER_IP>/open-audit/
Optional - change and note the oae_username and oae_password values.
The email section is described in the Open-AudIT Enterprise - Configuration Guide document.
Create the nmis user.
useradd nmis
Start the daemon.
service omkd start
Test the Daemon
You should now be able to point a web browser at http://SERVER:4082/omk/oae
Edit the file /usr/local/omk/install/04omk-proxy.conf and insert the ip address of the server into the relevant "location" sections (replacing <SERVER>). Make sure you don't use 127.0.0.1.
nano /usr/local/omk/install/04omk-proxy.conf
Copy the apache config file to the correct location and restart apache.
For Debian / Ubuntu:
cp /usr/local/omk/install/04omk-proxy.conf /etc/apache2/conf.d/ service apache2 restart
For RedHat / CentOS:
cp /usr/local/omk/install/04omk-proxy.conf /etc/httpd/conf.d/ service httpd restart
Copy the required files into the webroot
For Debian / Ubuntu
cp -r /usr/local/open-audit/www/* /var/www/ chown -R root:www-data /var/www chmod -R 755 /var/www
For RedHat / CentOS
cp -r /usr/local/open-audit/www/* /var/www/html/ chown -R root:apache /var/www/html chmod -R 755 /var/www/html
Ensure index.php is pointed at the correct location.
Edit /var/www/index.php (for Debian/Ubuntu) or /var/www/html/index.php (for RedHat/CentOS) and check the lines that specify the $system_path and $application_folder. There are two lines for each variable. Ensure the windows paths are commented out by placing a # at the start of the line. The linux paths should correspond to /usr/local/open-audit/code_igniter/ (system or application).
Remove the unrequired index.html file from the webroot.
For Debian / Ubuntu
rm /var/www/index.html
For RedHat / CentOS
rm /var/www/html/index.php
If you have not already, set the root password for MySQL.
If you have set the password, the following steps will make use of it.
In the below commands, replace PASSWORD (only the PASSWORD containing all capital letters) with a suitable password of your choosing.
mysql -u root -e "USE mysql; UPDATE user set Password = password('PASSWORD') WHERE User = 'root'; FLUSH PRIVILEGES;"
Create the Open-AudIT database and the database user used by the application.
mysql -u root -pPASSWORD -e "CREATE DATABASE openaudit;" mysql -u root -pPASSWORD -e "CREATE USER openaudit@localhost IDENTIFIED BY 'openauditpassword';" mysql -u root -pPASSWORD -e "GRANT ALL PRIVILEGES ON openaudit.* TO openaudit@localhost IDENTIFIED BY 'openauditpassword';" mysql -u root -pPASSWORD -e "FLUSH PRIVILEGES;"
Insert the database schema
mysql -u root -pPASSWORD openaudit < /usr/local/open-audit/other/openaudit_mysql.sql
Set some configuration items. NOTE - replace IPADDRESS with your actual IP Address as obtained at the start of this document. Setting these details will activate the icon links in the header of Open-AudIT. These fields can also contain relative URL's, thus /omk/oae/map for a link to Maps for Open-AudIT on the same server. Links containing a port number must contain a full URL at this stage.
mysql -u root -popenauditrootuserpassword -e "USE openaudit; DELETE FROM oa_config WHERE config_name = 'maps_url'; INSERT INTO oa_config (config_name, config_value, config_editable, config_description) VALUES ('maps_url', 'http://IPADDRESS/omk/oae/map', 'y', 'The web server address of Maps for Open-AudIT Enterprise.');"
mysql -u root -popenauditrootuserpassword -e "USE openaudit; DELETE FROM oa_config WHERE config_name = 'oae_url'; INSERT INTO oa_config (config_name, config_value, config_editable, config_description) VALUES ('oae_url', 'http://IPADDRESS/omk/oae', 'y', 'The web server address of Open-AudIT Enterprise.');"
Test the website
You should now be able to access the web page at http://IPADDRESS/index.php Assuming you can, proceed to the next section.
Enter Your License
Go to the URL http://<server>/omk/oae/
Enter the default credentials of nmis and nm1888.
Click the "View and enter licenses" button.
Click "Enter a license key".
Paste your license key text into the text box and click "Add License".
You should see a message at the top of the screen saying "Success: You have added a license for Open-AudIT Enterprise."
Close the browser tab.
Click the "License Entered, Continue" button.
Accept the End User License Agreement.
You should now see the Open-AudIT Enterprise dashboard.
Log in to Open-AudIT Enterprise
Go to the URL http://IPADDRESS/omk/oae
Log in to Open-AudIT
Go to the URL http://IPADDRESS/index.php/login/index/main/list_groups
If you don't have a valid license, you should be able to log in to Open-AudIT at http://IPADDRESS/index.php