...
To change these using the GUI in OpenAudIT Open-AudIT navigate to menu -> Admin -> Community Configuration -> All Configuration
Code Block |
---|
| access_token_count | 20 | number | Allow this many access tokens to be stored in the cookie. |
Code Block |
+------------------------------------+-------------------------------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------+ | name | value | | access_token_enable | descriptiony | bool | Should we enable access tokens for CSRF mitigation. | +------------------------------------+-------------------------------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------+ | blessed_subnets_use | | blessed_subnets_use | y | bool | Should we only accept data from the blessed subnets list. | y | | Shouldcollector_check_minutes we only accept data from the blessed subnets list. | 5 | number | The default check interval for collectors. | | default_network_address | | The ip address or resolvable hostname used by external devices to talk to Open-AudIT. | | create_change_log | y | bool | | delete_noncurrent | Should Open-AudIT create an entry in the change log table if a change is detected. | n | Should we delete any attributes that are not present when we audit a device. | | create_change_log_bios | y | bool | | | discovery_create_alerts | y Should Open-AudIT create an entry in the change log table if a change is detected in the bios table. | Should Open-AudIT create an entry in the alert table if a| | create_change_log_disk is detected. | y | bool | Should Open-AudIT create an entry in the change log table if a change | | discovery_ip_exclude is detected in the disk table. | | | create_change_log_dns | Populate this list with ip addresses to be excluded from discovery. IPs should| bey separated by a space. | bool | Should Open-AudIT create an entry | | discovery_linux_script_directory | /tmp/ in the change log table if a change is detected in the dns table. | The directory the script is copied into on the target device. | | create_change_log_file | y | bool | Should Open-AudIT create an entry in the change log table if a change is detected | | discovery_linux_script_permissions | 700in the file table. | The permissions set on the audit_linux.sh script when it is copied to the target device.| | create_change_log_ip | y | bool | | discovery_nmap_os | n Should Open-AudIT create an entry in the change log table if a change is detected in the ip table. | When discovery runs Nmap, should we use the -O flag to capture OS information (will slow down scan and requires SUID on the Nmap binary under Linux). | | discovery_use_dns| | create_change_log_log | y | y | bool | Should Open-AudIT create an entry in the change log table if a change is | Should we use DNS for looking updetected in the hostnamelog and domaintable. | | create_change_log_memory | y | | discovery_use_ipmi | bool | yShould Open-AudIT create an entry in the change log table if a change is detected in the memory table. | Should we use ipmitool for discovering management ports if ipmitool is installed. | | create_change_log_module | y | | display_version bool | Should Open-AudIT create an entry in the change log table if a change is detected in the module table. | 2.0.1 | The version shown on the web pages. | create_change_log_monitor | y | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the monitor table. | | download_reportscreate_change_log_motherboad | y | download | bool | TellsShould Open-AudIT create toan entry advisein the browserchange tolog downloadtable asif a filechange is ordetected displayin the csv, xml, json reportsmotherboard table. Valid values are download and display. | | graph_days | | 30create_change_log_netstat | y | The number of days to report on for the Enterprise graphs. | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the netstat table. | | create_change_log_netstat_dynamic | n | | homepage | groupsbool | Should Open-AudIT create an entry in the change log table if a change is detected in the netstat table and the port is 49152 or greater. | Any links to the default page should be directed to this endpoint.| | create_change_log_netstat_registered | n | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the netstat table and the port is in the range of 1024 to 49151. | | internal_version create_change_log_netstat_well_known | y | 20170620 | bool | Should Open-AudIT create an entry in |the Thechange internallog numericaltable version.if a change is detected in the netstat table and the port is 1023 or lower. | | create_change_log_network | y | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the network table. | | logo | logo-banner-oac-oae | | create_change_log_nmap | The logoy to be used in Open-AudIT. Should be a 475x60 .png. Name should not include the file extension. logo-banner-oac-oae is the default. | | log_level | bool | Should Open-AudIT create an entry in the change log table if a change |is 5detected in the nmap table. | Tells Open-AudIT which severity of event (at least) should be logged. | | create_change_log_optical | y | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the optical table. | | log_retain_level_0 | 180 | | create_change_log_pagefile | Tells Open-AudIT how many days to keep logs with severity 0.y | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the pagefile table. | | logcreate_retainchange_levellog_1partition | y | 180 | bool | TellsShould Open-AudIT howcreate manyan daysentry toin keepthe logschange withlog severitytable 1.if a change is detected in the partition table. | | create_change_log_policy | y | | log_retain_level_2 | 180bool | Should Open-AudIT create an entry in the change log table if a change is detected in the policy table. | Tells Open-AudIT how many days to keep logs with severity 2. | | create_change_log_print_queue | y | bool | Should Open-AudIT create an entry in the change log table if a change is | | log_retain_level_3 detected in the print_queue table. | 180 | | create_change_log_processor | Tellsy Open-AudIT how many days to keep logs with severity 3. | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the processor table. | | logcreate_retainchange_level_4log_route | y | 180 | bool | TellsShould Open-AudIT howcreate manyan daysentry toin keepthe logschange withlog severitytable 4.if a change is detected in the route table. | | create_change_log_san | y | | log_retain_level_5 | 90 | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the san table. | Tells Open-AudIT how many days to keep logs with severity 5. | | create_change_log_scsi | y | | log_retain_level_6 bool | Should Open-AudIT create an entry in the change log table if a change |is 30detected in the scsi table. | Tells Open-AudIT how many days to keep logs with severity 6. | | create_change_log_server | y | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the server table. | | log_retain_level_7 | 7 | | create_change_log_server_item | y | Tells Open-AudIT how many days to keep logs with severity 7. | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the server_item table. | | mapscreate_change_apilog_keyservice | y | AIzaSyAhAUqssRASeC0Pfyx1TW1DXRmboG5bdG0 | The API key for Google Maps. | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the service table. | | create_change_log_share | y | | maps_url | /omk/open-audit/mapbool | Should Open-AudIT create an entry in the change log table if a change is detected in the share table. | The web server address of opMaps. | | create_change_log_software | y | bool | Should Open-AudIT create an entry in the change log table if a change is detected in | | match_dbus the software table. | n | | create_change_log_software_key | y | Should we match a device based on its dbus id. | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the software_key table. | | create_change_log_sound | y | | match_fqdn | y | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the sound table. | Should we match a device based on its fqdn. | | create_change_log_task | y | bool | Should Open-AudIT create an entry in the change log table if a change | | match_hostname is detected in the task table. | y | | create_change_log_user | Should we match a device based only| ony its hostname. | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the user table. | | match_hostname_dbus | | ycreate_change_log_user_group | y | Should we match a device based on its hostname and| dbusbool id. | Should Open-AudIT create an entry in the change log table if a change is detected in the user_group table. | | create_change_log_variable | n | | match_hostname_serial | y | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the variable table. | Should we match a device based on its hostname and serial. | | create_change_log_video | y | bool | | | match_hostname_uuid | yShould Open-AudIT create an entry in the change log table if a change is detected in the video table. | Should we match a device based on its hostname and UUID.| | create_change_log_vm | y | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the vm table. | | match_ip | n | | create_change_log_windows | y | Should we match a device based on its ip. | bool | Should Open-AudIT create an entry in the change log table if a change is detected in the windows table. | | database_show_row_limit | 1000 | | match_mac | nnumber | The limit of rows to show, rather than download when exporting a database table. | Should we match a device based on its mac address. | | decrypt_credentials | y | bool | | | match_mac_vmware When we display or export credentials, should we decrypt them. | n | Should we match a device based mac address even if it's a known likely duplicate from VMware. | | default_network_address | http://127.0.0.1./open-audit/ | text | The URL used by external | | match_serial devices to talk to Open-AudIT. | y | Should we match a device based on its serial number. | | delete_noncurrent | n | bool | Should we delete all non-current data. | | match_serial_type | y | Should we match a device based on its serial and type. | | delete_noncurrent_bios | n | | match_uuidbool | Should we delete non-current bios data. | y | Should we match a device based on its UUID. | | delete_noncurrent_disk | n | bool | | modulesShould we delete non-current disk data. | | The list of installed Opmantek modules. | | delete_noncurrent_dns | n | bool | Should we delete non-current dns data. | | nmis | n | Enable import / export to NMIS functions. | | delete_noncurrent_file | n | bool | Should we delete non-current file data. | | nmis_url | | The web server address of NMIS. | | delete_noncurrent_ip | n | bool | Should we delete non-current ip data. | | oae_license | none | License status of Open-AudIT Enterprise. | | delete_noncurrent_log | n | bool | Should we delete non-current log data. | | oae_product | Open-AudIT Community | The name of the installed commercial application. | | delete_noncurrent_memory | n | bool | Should we delete non-current memory data. | | oae_prompt | 2017-06-28 | Prompt to activate a license for Open-AudIT Enterprise. | | delete_noncurrent_module | n | | oae_urlbool | Should we delete non-current module data. | /omk/open-audit | The web server address of Open-AudIT Enterprise. | | delete_noncurrent_monitor | n | | page_refresh | bool | Should we delete non-current monitor data. | 300 | Interval in seconds between auto-refreshing the page. Set to 0 to cancel auto-refresh. | | delete_noncurrent_motherboard | n | | process_netstat_windows_dns | | bool | Should we delete non-current motherboard data. | Should we keep track of Windows netsta ports used by DNS above port 1000. | | rss_enabledelete_noncurrent_netstat | y | y | bool | Should we delete non-current netstat data. | Enable the RSS feed. | | delete_noncurrent_network | n | | rss_url | bool | https://community.opmantek.com/rss/OA.xml | The RSS feed URL. Should we delete non-current network data. | | delete_noncurrent_nmap | n | | uuid | bool | 980906d2-5994-11e7-a4a3-1c1b0d60813bShould we delete non-current nmap data. | The unique identfier of this Open-AudIT server. | | delete_noncurrent_optical | +------------------------------------+-------------------------------------------+-------------------------------------------------------------------------------------------------------------------------------------------------------+ n | bool | Should we delete non-current optical data. | | delete_noncurrent_pagefile | n | bool | Should we delete non-current pagefile data. | | delete_noncurrent_partition | n | bool | Should we delete non-current partition data. | | delete_noncurrent_policy | n | bool | Should we delete non-current policy data. | | delete_noncurrent_print_queue | n | bool | Should we delete non-current print_queue data. | | delete_noncurrent_processor | n | bool | Should we delete non-current processor data. | | delete_noncurrent_route | n | bool | Should we delete non-current route data. | | delete_noncurrent_san | n | bool | Should we delete non-current san data. | | delete_noncurrent_scsi | n | bool | Should we delete non-current scsi data. | | delete_noncurrent_server | n | bool | Should we delete non-current server data. | | delete_noncurrent_server_item | n | bool | Should we delete non-current server_item data. | | delete_noncurrent_service | n | bool | Should we delete non-current service data. | | delete_noncurrent_share | n | bool | Should we delete non-current share data. | | delete_noncurrent_software | n | bool | Should we delete non-current software data. | | delete_noncurrent_software_key | n | bool | Should we delete non-current software_key data. | | delete_noncurrent_sound | n | bool | Should we delete non-current sound data. | | delete_noncurrent_task | n | bool | Should we delete non-current task data. | | delete_noncurrent_user | n | bool | Should we delete non-current user data. | | delete_noncurrent_user_group | n | bool | Should we delete non-current user_group data. | | delete_noncurrent_variable | y | bool | Should we delete non-current variable data. | | delete_noncurrent_video | n | bool | Should we delete non-current video data. | | delete_noncurrent_vm | n | bool | Should we delete non-current vm data. | | delete_noncurrent_windows | n | bool | Should we delete non-current windows data. | | device_auto_delete | n | bool | Should we delete the device data completely from the database when the device status is set to Deleted. | | discovery_default_scan_option | 1 | number | The default discovery options for Nmap. | | discovery_ip_exclude | | text | Populate this list with ip addresses to be excluded from discovery. IPs should be separated by a space. | | discovery_limit | 20 | number | The maximum number of concurrent discoveries we should run. | | discovery_linux_script_directory | /tmp/ | text | The directory the script is copied into on the target device. | | discovery_linux_script_permissions | 700 | text | The permissions set on the audit_linux.sh script when it is copied to the target device. | | discovery_linux_use_sudo | y | bool | When running discovery commands on a Linux target, should we use sudo. | | discovery_override_nmap | n | bool | Override the detction of Nmap to enable discoveries. | | discovery_pid | | number | The discovery queue process pid. | | discovery_route_retrieve_limit | 500 | number | When discovering a device using SNMP, do not retrieve the route table if it contains more than this number of entries. | | discovery_ssh_timeout | 300 | number | Timeout duration (in seconds) when discovering a device via SSH. | | discovery_sudo_path | | text | Optional hardcoded path to sudo executable. Comma seperated for multiple paths. | | discovery_sunos_use_sudo | y | bool | When running discovery commands on a SunOS target, should we use sudo. | | discovery_use_dns | y | bool | Should we use DNS for looking up the hostname and domain. | | discovery_use_ipmi | y | bool | Should we use ipmitool for discovering management ports if ipmitool is installed. | | discovery_use_vintage_service | n | bool | On Windows, use the old way of running discovery with the Apache service account. | | display_version | 3.3.0 | text | The version shown on the web pages. | | download_reports | y | bool | Tells Open-AudIT to advise the browser to download as a file or display the csv, xml, json reports. | | graph_days | 30 | number | The number of days to report on for the Enterprise graphs. | | gui_trim_characters | 25 | number | When showing a table of information in the web GUI, replace characters greater than this with "...". | | homepage | groups | text | Any links to the default page should be directed to this endpoint. | | internal_version | 20191010 | number | The internal numerical version. | | log_level | 5 | number | Tells Open-AudIT which severity of event (at least) should be logged. | | log_retain_level_0 | 180 | number | Tells Open-AudIT how many days to keep logs with severity 0. | | log_retain_level_1 | 180 | number | Tells Open-AudIT how many days to keep logs with severity 1. | | log_retain_level_2 | 180 | number | Tells Open-AudIT how many days to keep logs with severity 2. | | log_retain_level_3 | 180 | number | Tells Open-AudIT how many days to keep logs with severity 3. | | log_retain_level_4 | 180 | number | Tells Open-AudIT how many days to keep logs with severity 4. | | log_retain_level_5 | 90 | number | Tells Open-AudIT how many days to keep logs with severity 5. | | log_retain_level_6 | 30 | number | Tells Open-AudIT how many days to keep logs with severity 6. | | log_retain_level_7 | 7 | number | Tells Open-AudIT how many days to keep logs with severity 7. | | maps_api_key | | text | The API key for Google Maps. | | maps_url | /omk/open-audit/map | text | The web server address of opMaps. | | match_dbus | n | bool | Should we match a device based on its dbus id. | | match_dns_fqdn | n | bool | Should we match a device based on its DNS fqdn. | | match_dns_hostname | n | bool | Should we match a device based on its DNS hostname. | | match_fqdn | y | bool | Should we match a device based on its fqdn. | | match_hostname | y | bool | Should we match a device based only on its hostname. | | match_hostname_dbus | y | bool | Should we match a device based on its hostname and dbus id. | | match_hostname_serial | y | bool | Should we match a device based on its hostname and serial. | | match_hostname_uuid | y | bool | Should we match a device based on its hostname and UUID. | | match_ip | n | bool | Should we match a device based on its ip. | | match_ip_no_data | y | bool | Should we match a device based on its ip if we have an existing device with no data. | | match_mac | y | bool | Should we match a device based on its mac address. | | match_mac_vmware | n | bool | Should we match a device based mac address even if its a known likely duplicate from VMware. | | match_serial | y | bool | Should we match a device based on its serial number. | | match_serial_type | y | bool | Should we match a device based on its serial and type. | | match_sysname | y | bool | Should we match a device based only on its SNMP sysName. | | match_sysname_serial | y | bool | Should we match a device based only on its SNMP sysName and serial. | | match_uuid | y | bool | Should we match a device based on its UUID. | | nmis | n | bool | Enable import / export to NMIS functions. | | nmis_url | | text | The web server address of NMIS. | | oae_license | | text | License status of Open-AudIT Enterprise. | | oae_product | | text | The name of the installed commercial application. | | oae_prompt | 2001-01-01 | date | Prompt to activate a license for Open-AudIT Enterprise. | | oae_url | /omk/open-audit | text | The web server address of Open-AudIT Enterprise. | | output_escape_csv | y | bool | Escape CSV output so Excel will not attempt to run contents. | | page_size | 1000 | number | The default limit of rows to retrieve. | | process_netstat_windows_dns | n | bool | Should we keep track of Windows netstat ports used by DNS above port 1000. | | queue_count | 0 | number | The current number of concurrent device scans running. | | queue_limit | 20 | number | The maximum number of concurrent device scans we should run. | | rss_enable | y | bool | Enable the RSS feed. | | rss_url | https://community.opmantek.com/rss/OA.xml | text | The RSS feed URL. | | servers | | text | The servers to report to when using Agent / Collector / Server. | | server_ip | | text | The locally detected IP Addresses of this server. | | uuid | unique per installation | text | The unique identfier of this Open-AudIT server. |