Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Current »


Introduction

When a discovery is run, the relevant discovery scan option is chosen and those settings are used by Nmap to scan the target devices.  The scan options determine which ports nmap scans, how fast they scan and whether or not nmap ping is first used to determine if the IP is live or not.

Starting with Open-AudIT 2.3.2 we have introduced sets of pre-configured options for running the discovery scan, these pre-configured options allow a range of Nmap scan options. More detail is here: New Discovery Options

As at 3.3.0 we have introduced a "filtered|open" option to discovery scan options, this option determines if an open but filtered port is considered as an interesting port on the remote device. It has a default of 'y'. Previously we used the "filtered" column to check for open|filtered. This change aligns the discovery scan options with Nmap return strings.

As at 4.0.3 we allow the user to over-write individual discovery scan options without having to create a 'custom scan'.

How Does it Work?

When a discovery is run, the relevant discovery scan option is chosen and those settings used by Nmap to scan the target devices. If no option set is chosen, the default configuration item (discovery_default_scan_option) is selected and used.


If a device is individually discovered using the "Discover Device" link on the device details page, we first check if this device has been discovered previously (by Discovery) and if so, use the discovery options from that scan. If it has not been previously discovered, we revert to the configuration item discovery_default_scan_option the settings.

Creating a Discovery Scan Options entry

Discovery Scan Options are just another item collection. Enterprise users can create, read, update and delete entries as required. Professional users can read all entries, but not create new entries, update existing entries or delete entries. Community users have no GUI that allows access to this collection.


The attributes for discovery scan options are as below.

AttributeDescription
ping

Must Respond To Ping. If set, Nmap will fist attempt to send and listen for an ICMP response. If the device does not respond, no further scanning will occur.

Previously a device did not have to respond to a ping for Open-AudIT to continue scanning.

service_version

Use Service Version Detection. When a detected port is detected as open, if set to 'y', Nmap will query the target device in an attempt to determine the version of the service running on this port.

This can be useful when identifying unclassified devices. This was not previously used.

open|filteredAn open|filtered port is considered open (and will trigger device detection).

Previously, Open-AudIT considered an Nmap response of "open|filtered" as a device responding on this port.

This has caused some customers issues where firewalls respond on behalf of a non-existing device, and hence cause false positive device detection. We now have this attribute available to set per scan.

filtered

A filtered port is considered open (and will trigger device detection).

timingThe standard Nmap timing options. Previously set at T4 (aggressive).
nmap_tcp_portsTop Nmap TCP Ports. The top 10, 100, 1000 ports to scan as per Nmaps "top ports" options. Previously we scanned the Top 1000 ports (the Nmap standard).
nmap_udp_portsTop Nmap UDP Ports. The top 10, 100, 1000 ports to scan as per Nmaps "top ports" options. Previously we scanned UDP 161 (snmp) only.
tcp_portsCustom TCP Ports. Any specific ports we would liuke scanned in addition to the Top TCP Ports. Comma seperated, no spaces.
udp_portsCustom UDP Ports. Any specific ports we would liuke scanned in addition to the Top UDP Ports. Comma seperated, no spaces.

The below fields can be overwritten by an individual discovery, while still "using" a discovery_scan_options item for these if they're not set in the discovery (changed as at 4.0.3, see above).
timeoutTimeout per Target. Wait for X seconds for a target response.
exclude_tcpExclude any ports listed from being scanned. Comma seperated, no spaces.
exclude_udpExclude any ports listed from being scanned. Comma seperated, no spaces.
exclude_ipExclude IP Addresses (individual IP - 192.168.1.20, ranges - 192.168.1.30-40 or subnets - 192.168.1.100/30) listed from being scanned. Comma seperated, no spaces.
ssh_portsScan for this port(s) and if detected open, use this port for SSH communication. This is added to the list of Custom TCP POrts above, so there is no need to include it in that listr as well. Comma seperated, no spaces.

Database Schema

The database schema can be found in the application is the user has database::read permission by going to menu: Admin -> Database -> List Tables, then clicking on the details button for the table.


API / Web Access

You can access the collection using the normal Open-AudIT JSON based API. Just like any other collection. Please see The Open-AudIT API documentation for further details.


Default Items

Shipped are a set of default items. These can be found by going to menu: Help → Defaults → Discovery Scan Options.

Introduction

As at Open-AudIT 2.3.2 and later, we have introduced some easy to use and extremely powerful options for discovering devices. These options centre around directing Nmap on how to discover devices.

We have grouped these options into what we're calling Discovery Scan Options. We ship seven different groups of options (items) by default that cover the common use-cases.

This benefits Community, Professional and Enterprise customers.

Feature Availability

Feature availability is dependent on license type as per the table below.

FeatureCommunityProfessionalEnterprise
Match Rules - set default for all discoveriesyyy
Discovery Scan Options - set default for all discoveriesyyy
Discovery Scan Options - read yy
Discovery Scan Options - set per discovery yy
Discovery Scan Options - create, read, update, delete  y
Discovery Scan Options - Custom per Discovery  y
Discovery Scan Options - Exclude IP, range, subnet per discovery  y
Discovery Scan Options - Exclude ports per discovery  y
Discovery Scan Options - Set device timeout, per discovery  y
Discovery Scan Options - Custom SSH port per discovery  y
Match Rules - set per discovery  y

 

Discovery Scan Types

The Discovery Scan Options we ship are detailed in the table below. As above, Enterprise users can create more of these or edit the shipped items.

 

AttributeUltraFastSuperFastFastMedium (Classic)1MediumSlowUltraSlow
Approximate time in seconds for remote IP scan1540901002401200
Must Respond to Pingyyynyyn
Use Service Version Detectionnnnnnyy
Consider Filtered Ports as Opennnnynyy
TimingT4T4T4T4T4T3T2
Top Nmap TCP Ports 101001000100010001000
Top Nmap UDP Ports 10100 1001001000
Custom TCP Ports22,135,62078620786207862078620786207862078
Custom UDP Ports161  161   
Exclude TCP Ports       
Exclude UDP Ports       
Timeout per Host       
Exclude IP (address, range, subnet)       
Custom SSH Port       

1The item for Medium (Classic) is similar to the Nmap for Discovery setting available in Open-AudIT 2.3.2.

Check the wiki here for a deeper look at Discovery Scan Options.

Example Scanning Improvement

We have a customer who is running discovery on a /22. The scan time to complete when using the original (hard set) options, prior to 2.3.2 was 29 hours. Using 2.3.2's UltraFast option, that scan now takes less than 10 minutes. To say they are impressed would be an understatement! They are now left with a smaller set of unknown devices that they can run a more detailed audit against. And remember, if the audited device is a computer, you will have a list of open ports derived from Netstat, anyway - possibly saving another audit cycle.

Use Cases

Handling Duplicate Serials

Recently we had cause to scan a subnet that was made up of virtual Cisco networking devices. These devices all happened to have identical serial numbers. Using the Match Rules per Discovery (available to Enterprise users) we were able to tweak the ruleset for this discovery only, without affecting other discoveries that rely upon matching a serial number. This ability solved a long-standing issue of working around a less than ideal setup on a network. A serial number, by definition, should be unique.

Filtered Ports

Networks respond differently depending on how they're configured. Some routers and/or firewalls can respond "on behalf" of IPs on the other side of their interfaces to the Open-AudIT Server. It is quite common to see Nmap report a probe for SNMP (UDP port 161) to respond as open|filtered for devices that do and do not exist. This is misleading as there is no device at that IP, yet it ends up with a device entry in the database. 99.9% of the time, it is not Open-AudIT, nor even Nmap, but the network causing this issue. Now that we have the options to treat open|filtered ports as either open or closed, we can eliminate a lot of this confusion. Enterprise users even have the option to change this on a per discovery basis (more than just using the Medium (Classic) item, as above).

 

Discovery Enterprise Options

The screenshot below is the Open-AudIT discovery page where all the audit configuration is set. I've added ample notes in the page explaining all the options making the tool easy to use for less technical staff. 

Click to enlarge.

Check the wiki for a more detailed explanation about Discoveries

Display Improvements

As well as the functional improvements to discovery, we have also revised the Discovery Details page. We have sections for Summary, Details, Devices, Logs and IP Addresses. The Devices section, in particular, is now much more useful. We have added a new type of Unclassified to the list and we use this when we have more than just an IP and/or name for the device. For instance, we may know it's IP, name and the fact that it has port 135 open. This at least is a good indication that the device is likely a Windows machine. So we know "something". More than just "there is something at this IP". That is now an Unclassified device. We still support Unknown devices as always - for those devices we really know nothing about. An example of this screen is below. We also provide a quick link to creating credentials when a service (SSH, WMI, SNMP) has been identified, but we were not able to authenticate to it.

We think these display improvements will go a long way to assisting you to remove any Unknown or Unclassified devices that are on your network.

Click to enlarge.

 

Wrap Up

This new functionality makes Open-AudIT a powerful and easy to use discovery solution while providing great flexibility for advanced users.

I hope you enjoy the new features as much as our test customers and I do.

 

Mark Unwin.

 

 

 

 

  • No labels