opCommon
Space shortcuts
Child pages
  • Product Compatibility NMIS 8
Skip to end of metadata
Go to start of metadata

The table below describes which combinations of Opmantek products are tested and work well with what versions of NMIS 8.

For the latest products, compatible with NMIS 9 see Product Compatibility

 NMIS

NMIS Documentation. 

NMIS 8 Release Notes

NMIS 8 compatibility list:

Product

Product Version

MongoDB Version
(bold: recommended)

Operating

Systems

Notes
NMIS8.6.8N/A
  • Debian 7, 8
  • Ubuntu 16
  • CentOS 7*
  • RHEL 7*

On Debian 8, a compatible version of MongoDB Perl Driver (version 1.2.3 or newer) cannot be installed, even when CPANM is used.
On Ubuntu 16.04, pre-installing cpanminus, MongoDB Perl Driver and Mojo::File allows for a clean install of NMIS9:

apt-get install build-essential cpanminus;
cpanm --sudo MongoDB;
cpanm --sudo Mojo::File;

If install of NMIS 8 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS:

sudo yum install -y perl-CPAN;
sudo yum install -y perl-App-cpanminus;
sudo cpanm WWW::Mechanize --sudo --notest;

*NB CentOS 6 and RHEL 6 are supported for existing customers who purchased support prior to 2020.

Opmantek Installer

Some notes that are common for all Opmantek Products: 

  • The Opmantek installer can be preseeded before the installer is invoked.
  • On CentOS and RHEL, always check the status of firewalld and selinux when unable to connect via http|https. During the installation, the installer prompts for disable selinux.

 Open-AudIT

Open-AudIT Documentation.

Open-AudIT Release Notes

ProductProduct VersionDatabase

Operating

Systems

Notes
Open-AudIT3.3.1 +MariaDB
  • Windows Server 2016 and up (not compatible with Windows 10)
  • CentOS 7**
  • RHEL 7
  • RHEL 8
  • Debian 9 and up*
  • Ubuntu 18.04 and up

64bit systems only. More information.

*Should Debian 10 install fail with this error, 
'The following signatures couldn't be verified because the public key is not available: NO_PUBKEY',
please run the following commands to install the needed GPG Keys and reinstall:

sudo -i
type wget >/dev/null 2>&1 && GIMMEKEY="wget --tries=5 -q -T 20 -O - https://ftp-master.debian.org/keys/archive-key-8.asc" || GIMMEKEY="curl --retry 4 -L -s -m 20 https://ftp-master.debian.org/keys/archive-key-8.asc";
$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -;

**CentOS 8 is not supported due to CentOS 8 being end of maintenance in 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.centos.org/About/Product


 opConfig

opConfig Documentation. 

opConfig Release Notes

opConfig 2.X 3.X compatibility list: 

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)		Notes
opConfig 2.2.0>= 8.5.0, <= 8.5.8G2.4

opConfig 2.2.0 won't be able to report config

changes to NMIS if you run it with NMIS 8.5.10G

opConfig2.2.2, 2.2.4>= 8.5.10G2.4, 2.6 or 3.0 - 3.4

opConfig3.0.0>= 8.5.10G2.4, 2.6 or 3.0 - 3.4

To provide compatilibity with MongoDB 2.4 you have to set the

configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis)

opConfig3.0.3, 3.0.4>= 8.5.10G2.6, 3.0 - 3.4

! For a list of compatible Operating Systems please check the NMIS 8 version compatibility list. 

 opHA

opHA Documentation.

opHA 2 Release Notes

opHA 2.X Compatibility list: 

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)		Notes
opHA2.1.2>= 8.5.0, <= 8.5.8GN/A

opHA 2.1.2 won't be able to transfer NMIS event statuses

if you run it with NMIS 8.5.10G

opHA2.1.4>= 8.5.10GN/A

! For a list of compatible Operating Systems please check the NMIS 8 version compatibility list. 

 opEvents

opEvents Documentation.

opEvents 2 Release Notes

opEvents 1.X & 2.X Compatibility list: 

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)		Notes
opEvents1.2.4>= 8.5.02.4
opEvents1.2.6, 2.0.0>= 8.5.10G2.4, 2.6, 3.0 - 3.4
opEvents2.0.2>= 8.5.10G2.6, 3.0 - 3.4With MongoDB older than 2.6 the events table on the dashboard page will be empty.
opEvents2.0.3 - 2.0.6>= 8.5.10G2.4, 2.6, 3.0 - 3.4To provide compatibility with MongoDB 2.4 you have to set the
configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis)
opEvents2.2.0 - 2.4.0>= 8.5.10G2.6, 3.0 - 3.4

! For a list of compatible Operating Systems please check the NMIS 8 version compatibility list. 

 opCharts

opCharts Documentation.

opCharts 3 Release Notes

opCharts 2.X & 3.X Compatibility list: 

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)		Notes
opCharts2.4.12>= 8.5.6GN/A
opCharts2.6.2>= 8.5.6GN/AopCharts works best with NMIS 8.5.10G
opCharts3.0.0 - 3.0.7>= 8.5.6G2.6, 3.0 - 3.4opCharts works best with NMIS 8.5.10G or newer
opCharts3.0.8>= 8.5.10G2.6, 3.0 - 3.4
opCharts3.0.10>= 8.5.10G2.6, 3.0 - 3.4
opCharts3.2.0>= 8.5.10G3.0 - 3.4At and above opCharts 3.2 Mongo 3 is required
opCharts3.2.4 - 3.2.5>= 8.6.23.0 - 3.4

! For a list of compatible Operating Systems please check the NMIS 8 version compatibility list. 

 opReports

opReports Documentation.

opReports 3 Release Notes

opReports 3.X Compatibility list: 

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)		Notes
opReports3.0.2 - 3.0.8>= 8.5.0N/A
opReports3.0.10 - 3.0.14>=8.6.0N/ADisplay names are not supported if you use older versions of NMIS
opReports3.1.0>=8.6.2N/A

! For a list of compatible Operating Systems please check the NMIS 8 version compatibility list. 

 opAddress

opAddress Documentation.

opAddress Release Notes

opAddress 1.X Compatibility list: 

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)		Notes
opAddress1.0.4> 8.5.02.4
opAddress1.0.5>= 8.5.10G2.4, 2.6, 3.0 - 3.4

! For a list of compatible Operating Systems please check the NMIS 8 version compatibility list. 

 opFlow and opFlowSP

opFlow Documentation

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)		Notes
opFlow2.5.1>= 8.5.0, <= 8.5.8G2.4
opFlow2.5.2>= 8.5.10G2.4, 2.6, 3.0 - 3.4
opFlow3.0.0 - 3.0.5>=8.5.63.0 - 3.4WiredTiger storageEngine is HIGHLY recommended
opFlow3.0.6N/A3.0 - 3.4NMIS is optional. WiredTiger storageEngine is HIGHLY recommended.
opFlow3.0.8N/A3.0 - 3.4NMIS is optional. WiredTiger storageEngine is HIGHLY recommended.
opFlow3.0.10N/A3.0 - 3.4NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. For remote integration opCharts >= 3.0.6 required
opFlowSP3.0.2N/A3.0 - 3.4NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. For local opCharts button to agent/interface version >= 3.0.10 is required

! For a list of compatible Operating Systems please check the NMIS 8 version compatibility list. 

 opTrend

opTrend Documentation.

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)		Notes
opTrend1.2.1>= 8.5.6G, <= 8.5.8G2.4

opTrend's config optrend_process_condition_in_nmis must

be disabled if you run this version with NMIS 8.5.10G

opTrend1.2.3>= 8.5.10G2.4, 2.6, 3.0 - 3.4

! For a list of compatible Operating Systems please check the NMIS 8 version compatibility list. 


End of Life Products

 opExport

opExport Documentation.

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)		Notes
opExport1.6.7>= 8.5.0, <= 8.5.8GN/A
opExport1.6.8>= 8.5.10GN/A

! For a list of compatible Operating Systems please check the NMIS 8 version compatibility list. 

 opMaps

opMaps Documentation.

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)		Notes
opMaps

2.2.1

>= 8.4.8G

N/AWorks with any NMIS running .nmis files, i.e. if use_json is nonexistent or set to false
opMaps2.2.4>= 8.5.0GN/A

! For a list of compatible Operating Systems please check the NMIS 8 version compatibility list. 

  • No labels