The table below describes which combinations of Opmantek products are tested and work well with what versions of NMIS and MongoDB.
Please note that MongoDB 3.6 is not supported by Opmantek applications at this time.

 NMIS

NMIS Documentation. 

NMIS 8 compatibility list: 

*NB CentOS 6 and RHEL 6 are supported for existing customers who purchased support prior to 2020.

NMIS 9 compatibility list: 

Release 9.0.4 of NMIS introduces the smarter non-interactive installation mode.

*Should Debian 10 install fail with this error, 
'The following signatures couldn't be verified because the public key is not available: NO_PUBKEY',
please run the following command to install the needed GPG Keys and reinstall:

sudo -i
apt-get install dirmngr||apt-get install dirmngr||:;
NEED_KEYS=$(apt-get update -qq 2>&1|sed 's!\s\(NO_PUBKEY\s\+[A-Z0-9]\+\)\+!\n\1!g'|grep NO_PUBKEY|tr ' ' '\n'|grep -v NO_PUBKEY)
for KEY in ${NEED_KEYS}; do apt-key adv --keyserver keyserver.ubuntu.com --recv-keys "${KEY}"||:;done;

**CentOS 8 support has been withdrawn due to CentOS 8 being end of maintenance in 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.centos.org/About/Product

Opmantek Installer

Some notes that are common for all Opmantek Applications: 

• The Opmantek installer can be preseeded before the installer is invoked.
• On CentOS and RHEL, always check the status of firewalld and selinux when unable to connect via http|https. During the installation, the installer prompts for disable selinux.

 Open-AudIT

Open-AudIT Documentation.

*Should Debian 10 install fail with this error, 
'The following signatures couldn't be verified because the public key is not available: NO_PUBKEY',
please run the following command to install the needed GPG Keys and reinstall:

sudo -i
apt-get install dirmngr||apt-get install dirmngr||:;
NEED_KEYS=$(apt-get update -qq 2>&1|sed 's!\s\(NO_PUBKEY\s\+[A-Z0-9]\+\)\+!\n\1!g'|grep NO_PUBKEY|tr ' ' '\n'|grep -v NO_PUBKEY)
for KEY in ${NEED_KEYS}; do apt-key adv --keyserver keyserver.ubuntu.com --recv-keys "${KEY}"||:;done;

**CentOS 8 is not supported due to CentOS 8 being end of maintenance in 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.centos.org/About/Product

 opConfig

opConfig Documentation. 

opConfig 2.X 3.X compatibility list: 

opConfig 4.X compatibility list: 

! For a list of compatible Operating Systems please check the NMIS version compatibility list. 

 opHA

opHA Documentation.

opHA 2.X Compatibility list: 

opHA 3.X Compatibility list: 

! For a list of compatible Operating Systems please check the NMIS version compatibility list. 

 opEvents

opEvents Documentation.

opEvents 1.X & 2.X Compatibility list: 

opEvents 3.X Compatibility list: 

! For a list of compatible Operating Systems please check the NMIS version compatibility list. 

 opCharts

opCharts Documentation.

opCharts 2.X & 3.X Compatibility list: 

opCharts 4.X Compatibility list: 

! For a list of compatible Operating Systems please check the NMIS version compatibility list. 

 opReports

opReports Documentation.

opReports 3.X Compatibility list: 

opReports 4.X Compatibility list: 

! For a list of compatible Operating Systems please check the NMIS version compatibility list. 

 opAddress

opAddress Documentation.

opAddress 1.X Compatibility list: 

opAddress 2.X Compatibility list: 

! For a list of compatible Operating Systems please check the NMIS version compatibility list. 

 opFlow and opFlowSP

opFlow Documentation

! For a list of compatible Operating Systems please check the NMIS version compatibility list. 

 opTrend

opTrend Documentation.

! For a list of compatible Operating Systems please check the NMIS version compatibility list. 

End of Life Products

 opExport

opExport Documentation.

! For a list of compatible Operating Systems please check the NMIS version compatibility list. 

 opMaps

opMaps Documentation.

! For a list of compatible Operating Systems please check the NMIS version compatibility list.