The table below describes which combinations of Opmantek FirstWave products are tested and work well with what versions of NMIS 9 and MongoDB.Please note that MongoDB 3.6 is not supported by Opmantek applications at this time
For earlier products please see Product Compatibility NMIS 8.
Table of Contents | ||
---|---|---|
|
NMIS NMIS
...
NMIS Documentation.
NMIS
...
9 compatibility list:
Anchor | ||||
---|---|---|---|---|
|
Product | Product Version |
---|
MongoDB Version (bold: recommended) |
---|
Operating | Notes |
---|---|
NMIS |
>= 9. |
0. |
0 | 3.4, 3.6 |
|
|
|
|
| RHEL 8 is supported from NMIS version 9.2.1 If install of NMIS |
9 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS:
|
*NB CentOS 6 and RHEL 6 are supported for existing customers who purchased support prior to 2020.
NMIS 9 compatibility list:
NMIS | >= 9.4.0 | 3.4, 3.6, 4.2 | ||
NMIS | >=9.4.4 | 3.4, 3.6, 4.2 |
| OS's supported prior are also still supported in NMIS9 9.4.4 |
NMIS | >=9.4.7 | 3.4, 3.6, 4.2 |
| Redhat 9 support was introduced in NMIS9 9.4.7. OS's supported prior are still supported |
NMIS Version
(bold: recommended)
Operating
Systems
- Debian 9, 10
- Ubuntu 18, 20
- CentOS 7**
- RHEL 7
- RHEL 8
Should Debian 10 install fail with this error,
'The following signatures couldn't be verified because the public key is not available: NO_PUBKEY',
please run the following command to install the needed GPG Keys and reinstall:
Code Block |
---|
sudo -i
apt-get install dirmngr||apt-get install dirmngr||:;
NEED_KEYS=$(apt-get update -qq 2>&1|sed 's!\s\(NO_PUBKEY\s\+[A-Z0-9]\+\)\+!\n\1!g'|grep NO_PUBKEY|tr ' ' '\n'|grep -v NO_PUBKEY)
for KEY in ${NEED_KEYS}; do apt-key adv --keyserver keyserver.ubuntu.com --recv-keys "${KEY}"||:;done; |
RHEL 8 is supported from NMIS version 9.2.1G
On Debian 8, a compatible version of MongoDB Perl Driver (version 1.2.3 or newer) cannot be installed, even when CPANM is used.
On Ubuntu 16.04, pre-installing cpanminus, MongoDB Perl Driver and Mojo::File allows for a clean install of NMIS9:
- apt-get install build-essential cpanminus;
- cpanm --sudo MongoDB;
- cpanm --sudo Mojo::File;
If install of NMIS 9 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS:
sudo yum install -y perl-CPAN;sudo yum install -y perl-App-cpanminus;
sudo cpanm WWW::Mechanize --sudo --notest;
Release 9.0.4 of NMIS introduces the smarter non-interactive installation mode.
**CentOS 8 support has been withdrawn due to CentOS 8 being end of maintenance in on 31 Dec 2021, your CentOS target should be CentOS 7 7 https://wiki.centos.org/About/Product
...
FirstWave Installer
...
Some notes that are common for all Opmantek FirstWave Applications:
- The Opmantek FirstWave installer can can be preseeded before the installer is invoked.
- On CentOS and RHEL, always check the status of firewalld and selinux when unable to connect via http |or https. During the installation, the installer prompts for disable to disable selinux.
Open Open-AudIT
...
Open-AudIT Documentation.
Product | Product |
---|
Version |
---|
Database | Operating | Notes |
---|---|---|
Open-AudIT |
>= 5.0 | MariaDB |
|
|
RHEL
|
|
|
Should Debian 10 install fail with this error,
'The following signatures couldn't be verified because the public key is not available: NO_PUBKEY',
please run the following command to install the needed GPG Keys and reinstall:
| 64bit systems only. More information. |
- Open-AudIT 4.1.1 installer fails to install awscli version 1 on RHEL 8
- Pre-install awscli version 1 prior to Open-AudIT 4.1.1 install on RHEL 8:
https://docs.aws.amazon.com/cli/latest/userguide/install-cliv1.html - This will be fixed in Open-Audit 4.1.2 release.
*CentOS 8 is not supported due to CentOS 8 being end of maintenance in 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.centos.org/About/Product
...
opConfig
...
opConfig Documentation
opConfig 4.X
opConfig Documentation.
...
compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes |
---|---|
opConfig |
>= 4. |
0.0 | >= |
9. |
0 |
opConfig 2.2.0 won't be able to report config
changes to NMIS if you run it with NMIS 8.5.10G
To provide compatilibity with MongoDB 2.4 you have to set the
configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis)
opConfig 4.X compatibility list:
.0 | 3.4 | NMIS needs to be installed but doesn't need to be running. Please check the opConfig 4 release notes for a specific NMIS minor version requirement. | ||
opConfig | >= 4.1.1 | >= 9.1.0 | 3.4 | |
opConfig | >= 4.3.0 | >= 9.2.4 | 3.4, 3.6 | |
opConfig | >= 4.4.0 | >= 9.4.0 | 3.4, 3.6, 4.2 |
NMIS Version
(bold: recommended)
NMIS needs to be installed but doesn't need to be running.
Please check the opConfig 4 release notes for a specific NMIS minor version requirement.
Status | ||||
---|---|---|---|---|
|
opHA opHA
...
opHA Documentation.
opHA
...
3.X Compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes |
---|---|
opHA |
>= 3. |
0. |
0 | >= |
9. |
NMIS Version
(bold: recommended)
0.0 |
opHA 2.1.2 won't be able to transfer NMIS event statuses
if you run it with NMIS 8.5.10G
opHA 3.X Compatibility list:
3.4 | Please check the opHA 3 release notes for a specific NMIS minor version requirement. | |||
opHA | >= 3.1.2 | >= 9.1.0 | 3.4 |
opHA | >= 3.4.0 |
>= 9. |
2. |
4 | 3.4 |
, 3.6 | |
opHA |
>= 3. |
5. |
0 |
>= 9. |
4.0 | 3.4, 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
opEvents opEvents
...
opEvents Documentation.
opEvents
...
3.X
...
, 4.X Compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes | |
---|---|---|
opEvents |
>= 3. |
0. |
0 | >= |
9. |
0.0 |
3.4 | opEvents |
configuration option
db_use_v26_features
to "false" or 0 (in conf/opCommon.nmis
)opEvents 3.X Compatibility list:
3.X NMIS needs to be installed but doesn't need to be running. Please check the opEvents 3 Release Notes for a specific NMIS minor version requirement. | ||||
opEvents | >= 3.1.0 | >= 9.1.0 | 3.4 | |
opEvents | >= 4.1.0 | >= 9.2.4 | 3.4, 3.6 | opEvents 4.X NMIS |
NMIS Version
(bold: recommended)
needs to be installed but doesn't need to be running. Please check the |
opEvents 4 Release Notes for a specific NMIS minor version requirement. |
opEvents |
>= 4. |
2.0 |
>= 9. |
4.0 | 3.4, 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
opCharts opCharts
...
opCharts Documentation.
opCharts
...
4.X Compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes | |
---|---|---|
opCharts |
>= |
4. |
0.0 | >= 9.0.0 |
3.4 |
opCharts 4.X Compatibility list:
Please check the opCharts 4 release notes for a specific NMIS minor version requirement. | ||||
opCharts | >= 4.1.3 | >= 9.1.0 | 3.4 | |
opCharts | >= 4.3.0 | >= 9.2.4 | 3.4, 3.6 |
NMIS Version
(bold: recommended)
opCharts | >= 4. |
4.0 | >= 9. |
4.0 | 3.4 |
Please check the opCharts 4 release notes for a specific NMIS minor version requirement.
, 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
opReports opReports
...
opReports Documentation.
...
NMIS Version
...
opReports 4.X Compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes | |||
---|---|---|---|---|
opReports | >= 4.0.0 | >= 9.0.11 | N/A | Please check the opReports release notes for a specific NMIS minor version requirement. |
opReports |
>= 4.1.1 |
>= 9.1.0 | N/A |
Status | ||||
---|---|---|---|---|
|
opAddress
opAddress Documentation.
opAddress 1.X Compatibility list:
...
NMIS Version
...
opReports | >= 4.3.0 | >= 9.2.4 | N/A | |
opReports | >= 4.4.0 |
...
opAddress 2.X Compatibility list:
NMIS Version
(bold: recommended)
>= 9. |
4. |
0 | N/A |
Status | ||||
---|---|---|---|---|
|
opFlow and opFlowSP
...
opAddress
...
opAddress Documentation
opAddress 2.X Compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes |
---|
opAddress | >= |
2. |
0.0 |
>= |
9. |
2. |
1 | 3.0 - 3.4 |
opAddress |
>= 2.1.0 |
>= |
9. |
2. |
4 | 3. |
4, 3.6 |
opAddress | >= 2.2.0 | >= 9.4.0 | 3.4, 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
...
opFlow
...
opTrend opFlow Documentation.
...
NMIS Version
...
opTrend's config optrend_process_condition_in_nmis
must
be disabled if you run this version with NMIS 8.5.10G
opFlow 4.X Compatibility list:
...
Status | ||||
---|---|---|---|---|
|
...
opExport
...
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes |
---|
opFlow | >= |
4. |
0.0 |
>= |
9. |
Status | ||||
---|---|---|---|---|
|
opMaps
opMaps Documentation.
4.6 | 4.2 |
NMIS Version
(bold: recommended)
2.2.1
>= 8.4.8G
use_json
is nonexistent or set to falseStatus | ||||
---|---|---|---|---|
|