The table below describes which combinations of Opmantek FirstWave products are tested and work well with what versions of NMIS 9 and MongoDB.Please note that MongoDB 3.6 is not supported by Opmantek applications at this time.
For earlier products please see Product Compatibility NMIS 8.
Table of Contents | ||
---|---|---|
|
NMIS NMIS
...
NMIS Documentation.
NMIS 9
...
compatibility list:
Anchor | ||||
---|---|---|---|---|
|
Product | Product Version |
---|
MongoDB Version (bold: recommended) |
---|
Operating | Notes |
---|
NMIS | >= 9.0.0 | 3.4, 3.6 |
|
|
| RHEL 8 is supported from NMIS version 9.2.1 If install of NMIS |
9 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS:
|
*NB CentOS 6 and RHEL 6 are supported for existing customers who purchased support prior to 2020.
NMIS |
...
>= 9.4.0 | 3.4, 3.6, 4.2 | |
NMIS | >=9.4.4 |
...
NMIS Version
(bold: recommended)
Operating
Systems
3.4, 3.6, 4.2 |
|
|
RHEL 8 is supported from NMIS version 9.2.1
On Debian 8, a compatible version of MongoDB Perl Driver (version 1.2.3 or newer) cannot be installed, even when CPANM is used.
On Ubuntu 16.04, pre-installing cpanminus, MongoDB Perl Driver and Mojo::File allows for a clean install of NMIS9:
- apt-get install build-essential cpanminus;
- cpanm --sudo MongoDB;
- cpanm --sudo Mojo::File;
If install of NMIS 9 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS:
- sudo yum install -y perl-CPAN;
sudo yum install -y perl-App-cpanminus;
sudo cpanm WWW::Mechanize --sudo --notest;
| OS's supported prior are also still supported in NMIS9 9.4.4 | |||
NMIS | >=9.4.7 | 3.4, 3.6, 4.2 |
| Redhat 9 support was introduced in NMIS9 9.4.7. OS's supported prior are still supported |
Release 9.0.4 of NMIS introduces the smarter non-interactive installation mode.
*Should Debian 10 install fail with this error,
'The following signatures couldn't be verified because the public key is not available: NO_PUBKEY',
please run the following commands to install the needed GPG Keys and reinstall:
Code Block |
---|
sudo -i
type wget >/dev/null 2>&1 && GIMMEKEY="wget --tries=5 -q -T 20 -O - https://ftp-master.debian.org/keys/archive-key-8.asc" || GIMMEKEY="curl --retry 4 -L -s -m 20 https://ftp-master.debian.org/keys/archive-key-8.asc";
$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -; |
**CentOS 8 support has been withdrawn due to CentOS 8 being end of maintenance in on 31 Dec 2021, your CentOS target should be CentOS 7 7 https://wiki.centos.org/About/Product
...
FirstWave Installer
...
Some notes that are common for all Opmantek FirstWave Applications:
- The Opmantek FirstWave installer can can be preseeded before the installer is invoked.
- On CentOS and RHEL, always check the status of firewalld and selinux when unable to connect via http |or https. During the installation, the installer prompts for disable to disable selinux.
Open Open-AudIT
...
Open-AudIT Documentation.
Product | Product Version | Database | Operating | Notes |
---|---|---|---|---|
Open-AudIT |
>= 5.0 | MariaDB |
|
|
|
|
|
| 64bit systems only. More information. |
*Should Debian 10 install fail with this error,
'The following signatures couldn't be verified because the public key is not available: NO_PUBKEY',
please run the following commands to install the needed GPG Keys and reinstall:
Code Block |
---|
sudo -i
type wget >/dev/null 2>&1 && GIMMEKEY="wget --tries=5 -q -T 20 -O - https://ftp-master.debian.org/keys/archive-key-8.asc" || GIMMEKEY="curl --retry 4 -L -s -m 20 https://ftp-master.debian.org/keys/archive-key-8.asc";
$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -; |
**CentOS 8 is not supported due to CentOS 8 being end of maintenance in 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.centos.org/About/Product
...
opConfig
...
opConfig DocumentationopConfig Documentation.
opConfig
...
4.X
...
compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes |
---|---|
opConfig |
> |
= |
4 |
.0 |
. |
0 | >= |
To provide compatilibity with MongoDB 2.4 you have to set the
configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis)
opConfig 4.X compatibility list:
NMIS Version
(bold: recommended)
9.0.0 | 3.4 | NMIS needs to be installed but doesn't need to be running. Please check the opConfig 4 release notes for a specific NMIS minor version requirement. |
opConfig | >= 4.1.1 |
>= 9.1.0 | 3.4 | ||
opConfig | >= 4.3.0 |
>= 9. |
2. |
4 | 3.4, 3.6 | |
opConfig |
>= 4. |
4.0 |
>= 9.4.0 | 3.4 |
, 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
opHA opHA
...
opHA Documentation.
opHA 2.X Compatibility list:
...
NMIS Version
...
...
opHA
...
if you run it with NMIS 8.5.10G
...
opHA 3.X Compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes | |||
---|---|---|---|---|
opHA | >= 3.0.0 | >= 9.0.0 | 3.4 | Please check the opHA 3 release notes for a specific NMIS minor version requirement. |
opHA |
>= 3.1.2 |
>= 9.1.0 | 3.4 | |
opHA |
>= 3.4.0 |
>= 9.2.4 | 3.4, 3.6 | |||
opHA | >= 3.5.0 | >= 9.4.0 | 3.4, 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
opEvents opEvents
...
opEvents Documentation.
opEvents
...
3.X
...
, 4.X Compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes | |
---|---|---|
opEvents |
>= 3. |
0. |
0 | >= |
9. |
0.0 |
NMIS Version
(bold: recommended)
3.4 | opEvents |
configuration option
db_use_v26_features
to "false" or 0 (in conf/opCommon.nmis
)opEvents 3.X Compatibility list:
3.X NMIS needs to be installed but doesn't need to be running. Please check the opEvents 3 Release Notes for a specific NMIS minor version requirement. | ||||
opEvents | >= 3.1.0 | >= 9.1.0 | 3.4 | |
opEvents | >= 4.1.0 | >= 9.2.4 | 3.4, 3.6 | opEvents 4.X |
NMIS needs to be installed but doesn't need to be running. Please check the |
opEvents 4 Release Notes for a specific NMIS minor version requirement. |
opEvents |
>= 4. |
2.0 |
>= 9.4.0 | 3.4, 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
opCharts opCharts
...
opCharts Documentation.
opCharts
...
4.X
...
Compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes | |
---|---|---|
opCharts |
>= |
4. |
0. |
0 | >= 9.0.0 |
3.4 |
Please check the opCharts 4 release notes for a specific NMIS minor version requirement. | ||
opCharts | >= 4.1.3 | >= 9.1.0 |
3.4 | |
opCharts |
>= |
4.3.0 |
>= |
9. |
2.4 |
NMIS Version
(bold: recommended)
3. |
opCharts 4.X Compatibility list:
4, 3.6 | |
opCharts |
>= 4. |
4.0 | >= 9. |
4.0 | 3.4 |
Please check the opCharts 4 release notes for a specific NMIS minor version requirement.
, 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
opReports opReports
...
opReports Documentation.
opReports
...
4.X Compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes | |
---|---|---|
opReports |
>= |
...
4. |
...
NMIS Version
(bold: recommended)
0.0 | >= 9.0.11 | N/A | Please check the opReports release notes for a specific NMIS minor version requirement. |
opReports |
>= 4.1.1 |
>= 9.1.0 | N/A | |
opReports |
>= 4.3.0 |
>= 9.2.4 | N/A | |||
opReports | >= 4.4.0 | >= 9.4.0 | N/A |
Status | ||||
---|---|---|---|---|
|
opAddress opAddress
...
opAddress Documentation.
...
opAddress 2.X Compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes |
---|
opAddress |
>= |
opAddress 2.X Compatibility list:
NMIS Version
(bold: recommended)
2.0.0 | >= 9.2.1 | 3.0 - 3.4 | |
opAddress |
>= 2.1.0 | >= 9.2.4 | 3.4, 3.6 |
Status | ||||
---|---|---|---|---|
|
opFlow and opFlowSP
opFlow Documentation
...
NMIS Version
...
opAddress | >= 2.2.0 | >= 9.4.0 | 3.4, 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
...
opFlow
...
opTrend opFlow Documentation.
...
NMIS Version
...
opTrend's config optrend_process_condition_in_nmis
must
be disabled if you run this version with NMIS 8.5.10G
opFlow 4.X Compatibility list:
...
Status | ||||
---|---|---|---|---|
|
...
opExport
opExport Documentation.
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes |
---|
opFlow | >= |
4. |
0.0 |
>= |
9. |
4. |
Status | ||||
---|---|---|---|---|
|
opMaps
opMaps Documentation.
6 | 4.2 |
NMIS Version
(bold: recommended)
2.2.1
>= 8.4.8G
use_json
is nonexistent or set to falseStatus | ||||
---|---|---|---|---|
|