The table below describes which combinations of Opmantek products are tested and work well with what versions of NMIS 9 and MongoDB.Please note that MongoDB 3.6 is not supported by Opmantek applications at this time
For earlier products please see Product Compatibility NMIS 8.
NMIS
...
NMIS Documentation.
NMIS 9 Release Notes
NMIS
...
9 compatibility list:
Product | Product Version Image Modified | MongoDB Version (bold: recommended) |
---|
OperatingOperating Systems | Notes |
---|
NMIS |
868N/A 7 8 16- 18, 20
- CentOS 7*
- RHEL 7
- RHEL 8
| RHEL 8 is supported from NMIS version 9.2.1 If install of NMIS |
8 9 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS: sudo yum install -y perl-CPAN;
sudo yum install -y perl-App-cpanminus;
sudo cpanm WWW::Mechanize --sudo --notest;
|
NB CentOS 6 and RHEL 6 are supported for existing customers who purchased support prior to 2020.
NMIS 9 compatibility list:
...
NMIS Version
Image Removed
...
Operating
Systems
...
- Debian 9, 10
- Ubuntu 18
- CentOS 7, 8
- RHEL 7, 8
...
On Debian 8, a compatible version of MongoDB Perl Driver (version 1.2.3 or newer) cannot be installed, even when CPANM is used.
On Ubuntu 16.04, pre-installing cpanminus, MongoDB Perl Driver and Mojo::File allows for a clean install of NMIS9:
- apt-get install build-essential cpanminus;
- cpanm --sudo MongoDB;
- cpanm --sudo Mojo::File;
If install of NMIS 9 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS:
- sudo yum install -y perl-CPAN;
sudo yum install -y perl-App-cpanminus;
sudo cpanm WWW::Mechanize --sudo --notest;
|
NMIS | >= 9.4.0 | 3.4, 3.6, 4.2 |
NMIS | >=9.4.4 | 3.4, 3.6, 4.2 | - Debian 10
- Debian 11
- Mint 21.01
- RedHat 8.7
- Rocky 8.7
- Ubuntu 22.04
- Ubuntu 23.04
| OS's supported prior are also still supported in NMIS9 9.4.4 |
Release 9.0.4 of NMIS introduces the smarter non-interactive installation mode.
*CentOS 8 support has been withdrawn due to CentOS 8 being end of maintenance on 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.centos.org/About/Product
Opmantek Opmantek Installer
...
Some notes that are common for all Opmantek Applications:
- The Opmantek installer can be preseeded before the installer is invoked.
- On CentOS and RHEL, always check the status of firewalld and selinux when unable to connect via http|https. During the installation, the installer prompts for disable to disable selinux.
Open-AudIT
...
Open-AudIT Documentation.
NMIS Version Image Removed | Database | Operating Systems | Notes |
---|
Open-AudIT |
3.3.1 | N/A | 7 RedHat / CentOS 6 and up
Debian 8 and up
Ubuntu 14.04 and up- (not compatible with Windows 10)
- RHEL 8 and 9
- Debian 11 and 12
- Ubuntu 20.04 and 22.04
| 64bit systems only. More information. |
opConfig
...
opConfig Documentation.
opConfig Release Notes
opConfig
...
4.X
...
compatibility list:
Product | Product Version | NMIS Version Image Modified | MongoDB Version (bold: recommended) | Notes |
---|
opConfig |
22 85., <= 8.5.8G2.4 | opConfig 2.2.0 won't be able to report config changes to NMIS if you run it with NMIS 8.5.10G | 2.2.2, 2.2.4 | >= 8.5.10G | 2.4, 2.6 or 3.0 - 3.4
| 3.0.0 | >= 8.5.10G | 2.4, 2.6 or 3.0 - 3.4
| To provide compatilibity with MongoDB 2.4 you have to set the configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis) |
3.0.3, 3.0.4 | >= 8.5.10G | 2.6, 3.0 - 3.4 | opConfig 4.X compatibility list:
.0 | 3.4 | NMIS needs to be installed but doesn't need to be running. Please check the opConfig 4 release notes for a specific NMIS minor version requirement. |
opConfig | >= 4.1.1 | >= 9.1.0 | 3.4 |
|
opConfig | >= 4.3.0 | >= 9.2.4 | 3.4, 3.6 |
|
opConfig | >= 4.4.0 | >= 9.4.0 | 3.4, 3.6, 4.2 |
Product Version | NMIS Version Image Removed | MongoDB Version (bold: recommended) | Notes |
---|
4.0.0 | > 9.0.0 | 3.4 | NMIS needs to be installed but doesn't need to be running. Please check the opConfig 4 release notes for a specific NMIS minor version requirement. |
>4.1.1 | >9.1.0 | 3.4 For a list of compatible Operating Systems please check the
NMIS version compatibility list.
opHA
...
opHA Documentation.
opHA Release Notes
opHA
...
3.X Compatibility list:
Product | Product Version | NMIS Version Image Modified | MongoDB Version (bold: recommended) | Notes |
---|
opHA |
212 85Product | Product Version | NMIS Version Image Removed | MongoDB Version (bold: recommended) | Notes |
, <= 8.5.8GN/A | opHA 2.1.2 won't be able to transfer NMIS event statuses if you run it with NMIS 8.5.10G | opHA | 2.1.4 | >= 8.5.10G | N/A | opHA 3.X Compatibility list:
| 3.4 | Please check the opHA 3 release notes for a specific NMIS minor version requirement. |
opHA | >= 3.1.2 | >= 9.1.0 | 3.4 |
|
.0 00Please check the opHA 3 release notes for a specific NMIS minor version requirement. >312>91 For a list of compatible Operating Systems please check the
NMIS version compatibility list.
opEvents
...
opEvents Documentation.
opEvents Release Notes
opEvents
...
3.X
...
, 4.X Compatibility list:
Product | Product Version | NMIS Version Image Modified | MongoDB Version (bold: recommended) | Notes |
---|
opEvents |
124 8521.2.6, 2.0.0 | >= 8.5.10G | 2.4, 2.6, 3.0 - 3.4 | opEvents | 2.0.2 | >= 8.5.10G | 2.6, 3.0 - 3.4 | With MongoDB older than 2.6 the events table on the dashboard page will be empty. |
opEvents | 2.0.3 - 2.0.6 | >= 8.5.10G | 2.4, 2.6, 3.0 - 3.4 | To provide compatilibity with MongoDB 2.4 you have to set the configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis ) |
opEvents | 2.2.0 - 2.4.0 | >= 8.5.10G | 2.6, 3.0 - 3.4 | opEvents 3.X Compatibility list:
3.X NMIS needs to be installed but doesn't need to be running. Please check the opEvents 3 Release Notes for a specific NMIS minor version requirement. |
opEvents | >= 3.1.0 | >= 9.1.0 | 3.4 |
|
opEvents | >= 4.1.0 | >= 9.2.4 | 3.4, 3.6 | opEvents 4.X |
Product | Product Version | NMIS Version Image Removed | MongoDB Version (bold: recommended) | Notes |
---|
opEvents | >= 3.0.0 | > 9.0.0 | 3.4NMIS needs to be installed but doesn't need to be running. Please check the |
opConfig 4 release notes for >31>91 For a list of compatible Operating Systems please check the
NMIS version compatibility list.
opCharts
...
opCharts Documentation.
opCharts Release Notes
opCharts
...
4.X
...
Compatibility list:
Product | Product Version | NMIS Version Image Modified | MongoDB Version (bold: recommended) | Notes |
---|
opCharts | 2.4.12 | >= 8.5.6GN/A | 2.6.2 8.5.6GN/A | opCharts works best with NMIS 8.5.10G | opCharts | 3. - 3.0.7 856G2.6, 0 - 3.opCharts works best with NMIS 8.5.10G or newer | opCharts | 3.0.8 | >= 8.5.10G | 2.6, 3.0 - 3.4 | opCharts | 3.0.10 | >= 8.5.10G | 2.6, 3.0 - 3.4 | opCharts | 3.2.0 | >= 8.5.10G | 3.0 - 3.4 | At and above opCharts 3.2 Mongo 3 is required |
opCharts | 3.2.4 - 3.2.5 | >= 8.6.2 | 3.0 - 3.4 | opCharts 4.X Compatibility list:
Please check the opCharts 4 release notes for a specific NMIS minor version requirement. |
opCharts | >= 4.1.3 | >= 9.1.0 | 3.4 |
|
opCharts | >= 4.3.0 | >= 9.2.4 | 3.4, 3.6 |
|
opCharts | >= 4.4 |
Product | Product Version | NMIS Version Image Removed | MongoDB Version (bold: recommended) | Notes |
---|
opCharts | >= 4.00Please check the opCharts 4 release notes for a specific NMIS minor version requirement. | opCharts | >4.1.3 | >9.1.0 | 3.4 For a list of compatible Operating Systems please check the
NMIS version compatibility list.
opReports
...
opReports Documentation.
opReports
...
NMIS Version
Image Removed
...
Release Notes
opReports
...
opReports 4.X Compatibility list:
Product | Product Version | NMIS Version Image Modified | MongoDB Version (bold: recommended) | Notes |
---|
opReports | >= 4.0.0 | >= 9.0.11 | N/A | Please check the opReports release notes for a specific NMIS minor version requirement. |
opReports |
>4>9 For a list of compatible Operating Systems please check the NMIS version compatibility list. Image Removed opFlow and opFlowSP
opFlow Documentation
|
opReports | >= 4.3.0 | >= 9.2.4 | N/A |
|
opReports | >= 4.4.0 | >= 9.4.0 | N/A |
Product | Product Version | NMIS Version Image Removed | MongoDB Version (bold: recommended) | Notes |
---|
opFlow | 2.5.1 | >= 8.5.0, <= 8.5.8G | 2.4 | opFlow | 2.5.2 | >= 8.5.10G | 2.4, 2.6, 3.0 - 3.4 | opFlow | 3.0.0 - 3.0.5 | >=8.5.6 | 3.0 - 3.4 | WiredTiger storageEngine is HIGHLY recommended |
opFlow | 3.0.6 | N/A | 3.0 - 3.4 | NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. |
opFlow | 3.0.8 | N/A | 3.0 - 3.4 | NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. |
opFlow | 3.0.10 | N/A | 3.0 - 3.4 | NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. For remote integration opCharts >= 3.0.6 required |
opFlowSP | 3.0.2 | N/A | 3.0 - 3.4 | NMIS is optional. WiredTiger storageEngine is HIGHLY recommended. For local opCharts button to agent/interface version >= 3.0.10 is required For a list of compatible Operating Systems please check the
NMIS version compatibility list.
...
Image Added opAddress
...
opAddress Documentation
opAddress Release Notes
opAddress 2.X Compatibility list:
1.2.1Product | Product Version | NMIS Version Image Modified | MongoDB Version (bold: recommended) | Notes |
---|
opTrend | 856G, < 8.58G.4opTrend's config optrend_process_condition_in_nmis
must
be disabled if you run this version with NMIS 85.10GopTrend | .2.3>= 8.5.10G | 2.4, 2.6, Product | Product Version | NMIS Version Image Removed | MongoDB Version (bold: recommended) | Notes |
---|
For a list of compatible Operating Systems please check the NMIS version compatibility list. Image Removed opAddress
opAddress Documentation.
1.0.4 | > 8.5.0 | 2.4 | opAddress | .5 8510G2 2.6, .0 - 3.4 For a list of compatible Operating Systems please check the NMIS version compatibility list. End of Life Products
Image Removed opExport
...
...
Product | Product Version | NMIS Version Image Removed | MongoDB Version (bold: recommended) | Notes |
---|
opExport | 1..7>= 8.5.0, <= 8.5.8G | N/A | opExport | 1.6.8 | >= 8.5.10G | N/A | For a list of compatible Operating Systems please check the NMIS version compatibility list. Image Removed opMaps
opMaps Documentation.
Product | Product Version | NMIS Version Image Removed | MongoDB Version (bold: recommended) | Notes |
---|
opMaps | 1 88GN/A | Works with any NMIS running .nmis files, i.e. if use_json is nonexistent or set to false
| opMaps | 2.2.4 | >= 8.5.0G | N/A For a list of compatible Operating Systems please check the NMIS version compatibility list.