The table below describes which combinations of Opmantek products are tested and work well with what versions of NMIS 9 and MongoDB.Please note that MongoDB 3.6 is not supported by Opmantek applications at this time.
For earlier products please see Product Compatibility NMIS 8.
Table of Contents | ||
---|---|---|
|
NMIS
...
NMIS Documentation.
NMIS
...
9 compatibility list:
Anchor | ||
---|---|---|
|
...
...
Operating
Systems
...
...
- Debian 7, 8
- Ubuntu 16
- CentOS 7*
- RHEL 7*
...
|
...
- sudo yum install -y perl-CPAN;
sudo yum install -y perl-App-cpanminus;
sudo cpanm WWW::Mechanize --sudo --notest;
Product | Product |
---|
*NB CentOS 6 and RHEL 6 are supported for existing customers who purchased support prior to 2020.
NMIS 9 compatibility list:
Version | MongoDB Version (bold: recommended) |
---|
Operating | Notes | ||
---|---|---|---|
NMIS | >= 9.0.0 | 3.4, 3.6 |
|
|
| RHEL 8 is supported from NMIS version 9.2. |
1 |
On Ubuntu 16.04, pre-installing cpanminus, MongoDB Perl Driver and Mojo::File allows for a clean install of NMIS9:
- apt-get install build-essential cpanminus;
- cpanm --sudo MongoDB;
- cpanm --sudo Mojo::File;
If install of NMIS 9 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS:
|
...
NMIS | >= 9.4.0 | 3.4, 3.6, 4 |
...
.2 | ||||
NMIS | >=9.4.4 | 3.4, 3.6, 4.2 |
| OS's supported prior are also still supported in NMIS9 9.4.4 |
Release 9.0.4 of NMIS introduces the smarter non-interactive installation mode.
*
*Should Debian 10 install fail with this error,
'The following signatures couldn't be verified because the public key is not available: NO_PUBKEY',
please run the following command to install the needed GPG Keys and reinstall:
Code Block |
---|
sudo -i
apt-get install dirmngr||apt-get install dirmngr||:;
NEED_KEYS=$(apt-get update -qq 2>&1|sed 's!\s\(NO_PUBKEY\s\+[A-Z0-9]\+\)\+!\n\1!g'|grep NO_PUBKEY|tr ' ' '\n'|grep -v NO_PUBKEY)
for KEY in ${NEED_KEYS}; do apt-key adv --keyserver keyserver.ubuntu.com --recv-keys "${KEY}"||:;done; |
**CentOS 8 support has been withdrawn due to CentOS 8 being end of maintenance in on 31 Dec 2021, your CentOS target should be CentOS 7 7 https://wiki.centos.org/About/Product
Opmantek Opmantek Installer
...
Some notes that are common for all Opmantek Applications:
- The Opmantek installer can be preseeded before the installer is invoked.
- On CentOS and RHEL, always check the status of firewalld and selinux when unable to connect via http|https. During the installation, the installer prompts for disable to disable selinux.
Open-AudIT
...
Open-AudIT Documentation.
Product | Product Version |
---|
NMIS Version
Database | Operating | Notes |
---|---|---|
Open-AudIT |
>= 5.0 | MariaDB |
|
| 64bit systems only. More information. |
- Open-AudIT 4.1.1 installer fails to install awscli version 1 on RHEL 8
- Pre-install awscli version 1 prior to Open-AudIT 4.1.1 install on RHEL 8:
https://docs.aws.amazon.com/cli/latest/userguide/install-cliv1.html - This will be fixed in Open-Audit 4.1.2 release.
*Should Debian 10 install fail with this error,
'The following signatures couldn't be verified because the public key is not available: NO_PUBKEY',
please run the following command to install the needed GPG Keys and reinstall:
Code Block |
---|
sudo -i
apt-get install dirmngr||apt-get install dirmngr||:;
NEED_KEYS=$(apt-get update -qq 2>&1|sed 's!\s\(NO_PUBKEY\s\+[A-Z0-9]\+\)\+!\n\1!g'|grep NO_PUBKEY|tr ' ' '\n'|grep -v NO_PUBKEY)
for KEY in ${NEED_KEYS}; do apt-key adv --keyserver keyserver.ubuntu.com --recv-keys "${KEY}"||:;done; |
**CentOS 8 is not supported due to CentOS 8 being end of maintenance in 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.centos.org/About/Product
opConfig
...
opConfig Documentation.
opConfig
...
4.X compatibility list:
Product | Product Version | NMIS Version | MongoDB Version (bold: recommended) | Notes |
---|
opConfig | >= 4.0.0 | >= |
9.0 |
opConfig 2.2.0 won't be able to report config
changes to NMIS if you run it with NMIS 8.5.10G
To provide compatilibity with MongoDB 2.4 you have to set the
configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis)
opConfig 4.X compatibility list:
.0 | 3.4 | NMIS needs to be installed but doesn't need to be running. Please check the opConfig 4 release notes for a specific NMIS minor version requirement. | ||
opConfig | >= 4.1.1 | >= 9.1.0 | 3.4 | |
opConfig | >= 4.3.0 | >= 9.2.4 | 3.4, 3.6 | |
opConfig | >= 4.4.0 | >= 9.4.0 | 3.4, 3.6, 4.2 |
NMIS Version
(bold: recommended)
NMIS needs to be installed but doesn't need to be running.
Please check the opConfig 4 release notes for a specific NMIS minor version requirement.
Status | ||||
---|---|---|---|---|
|
opHA
...
opHA Documentation.
opHA
...
3.X Compatibility list:
Product | Product Version | NMIS Version | MongoDB Version (bold: recommended) | Notes |
---|---|---|---|---|
opHA |
>= 3. |
0. |
0 | >= |
9. |
NMIS Version
(bold: recommended)
0.0 |
opHA 2.1.2 won't be able to transfer NMIS event statuses
if you run it with NMIS 8.5.10G
opHA 3.X Compatibility list:
3.4 | Please check the opHA 3 release notes for a specific NMIS minor version requirement. | |||
opHA | >= 3.1.2 | >= 9.1.0 | 3.4 |
opHA | >= 3.4.0 |
>= 9. |
2. |
4 | 3.4 |
, 3.6 | |
opHA |
>= 3. |
5. |
0 |
>= 9. |
4.0 | 3.4, 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
opEvents
...
opEvents Documentation.
opEvents
...
3.X
...
, 4.X Compatibility list:
Product | Product Version | NMIS Version | MongoDB Version (bold: recommended) | Notes |
---|---|---|---|---|
opEvents |
>= 3. |
0. |
0 | >= |
9. |
0.0 |
NMIS Version
(bold: recommended)
3.4 | opEvents |
configuration option
db_use_v26_features
to "false" or 0 (in conf/opCommon.nmis
)opEvents 3.X Compatibility list:
3.X NMIS needs to be installed but doesn't need to be running. Please check the opEvents 3 Release Notes for a specific NMIS minor version requirement. | ||||
opEvents | >= 3.1.0 | >= 9.1.0 | 3.4 | |
opEvents | >= 4.1.0 | >= 9.2.4 | 3.4, 3.6 | opEvents 4.X |
NMIS needs to be installed but doesn't need to be running. Please check the |
opEvents 4 Release Notes for a specific NMIS minor version requirement. |
opEvents |
>= 4. |
2.0 |
>= 9. |
4.0 | 3.4, 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
opCharts
...
opCharts Documentation.
opCharts
...
4.X Compatibility list:
Product | Product Version | NMIS Version | MongoDB Version (bold: recommended) | Notes |
---|---|---|---|---|
opCharts |
>= |
4. |
0. |
0 | >= 9.0.0 |
3.4 |
Please check the opCharts 4 release notes for a specific NMIS minor version requirement. | ||
opCharts | >= 4.1.3 | >= 9.1.0 |
3.4 | |
opCharts |
>= |
4.3.0 | >= |
9.2.4 |
NMIS Version
(bold: recommended)
3. |
opCharts 4.X Compatibility list:
4, 3.6 |
opCharts | >= 4. |
4.0 | >= 9. |
4.0 | 3.4 |
Please check the opCharts 4 release notes for a specific NMIS minor version requirement.
, 3.6, 4.2 |
Status | ||||
---|---|---|---|---|
|
opReports
...
opReports Documentation.
...
NMIS Version
...
opReports
...
opReports 4.X Compatibility list:
Product | Product Version | NMIS Version | MongoDB Version (bold: recommended) | Notes |
---|---|---|---|---|
opReports | >= 4.0.0 | >= 9.0.11 | N/A | Please check the opReports release notes for a specific NMIS minor version requirement. |
opReports |
>= 4.1.1 |
>= 9.1.0 | N/A |
Status | ||||
---|---|---|---|---|
|
opAddress
opAddress Documentation.
opAddress 1.X Compatibility list:
...
NMIS Version
...
opReports | >= 4.3.0 | >= 9.2.4 | N/A | |
opReports | >= 4.4 |
...
opAddress 2.X Compatibility list:
NMIS Version
(bold: recommended)
.0 | >= 9. |
4. |
0 | N/A |
Status | ||||
---|---|---|---|---|
|
opFlow and opFlowSP
...
opAddress
...
opAddress Documentation
opAddress 2.X Compatibility list:
Product | Product Version | NMIS Version | MongoDB Version (bold: recommended) | Notes |
---|
opAddress | >= 2.0.0 | >= 9.2.1 |
3.0 - 3.4 |
Status | ||||
---|---|---|---|---|
|
opTrend
opTrend Documentation.
...
NMIS Version
...
opTrend's config optrend_process_condition_in_nmis
must
be disabled if you run this version with NMIS 8.5.10G
...
Status | ||||
---|---|---|---|---|
|
...
opAddress | >= 2.1.0 | >= 9.2.4 | 3.4, 3.6 | |
opAddress | >= 2.2.0 | >= 9.4.0 | 3.4, 3.6, 4.2 |
opExport
opExport Documentation.
...
NMIS Version
...
Status | ||||
---|---|---|---|---|
|
opMaps
opMaps Documentation.
NMIS Version
(bold: recommended)
2.2.1
>= 8.4.8G
use_json
is nonexistent or set to falseStatus | ||||
---|---|---|---|---|
|