The table below describes which combinations of Opmantek FirstWave products are tested and work well with what versions of NMIS 9 and MongoDB.Please note that MongoDB 3.6 is not supported by Opmantek applications at this time
For earlier products please see Product Compatibility NMIS 8.
Table of Contents | ||||
---|---|---|---|---|
|
NMIS
NMIS Documentation.
|
NMIS
...
NMIS Documentation
NMIS 9
...
compatibility list:
Anchor | ||||
---|---|---|---|---|
|
Product | Product Version |
---|
MongoDB Version (bold: recommended) |
---|
Operating | Notes |
---|
- Debian 7, 8
- Ubuntu 16
- CentOS 6, 7
NMIS 9 compatibility list:
NMIS | >= 9.0.0 | 3.4, 3.6 |
| RHEL 8 is supported from NMIS version 9.2.1 If install of NMIS 9 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS:
|
NMIS | >= 9.4.0 | 3.4, 3.6, 4.2 | ||
NMIS | >= 9.4.4 | 3.4, 3.6, 4.2 |
| OS's supported prior are also still supported in NMIS9 9.4.4 |
NMIS | >= 9.4.7 | 3.4, 3.6, 4.2 |
| RedHat 9 support was introduced in NMIS9 9.4.7. OS's supported prior are still supported |
NMIS | >= 9.5.0 | 4.2, 6.0 |
|
NMIS Version
(bold: recommended)
Operating
Systems
- Debian 9, 10
- Ubuntu 18
- CentOS 7, 8
On Debian 8, a compatible version of MongoDB Perl Driver (version 1.2.3 or newer) cannot be installed, even when CPANM is used.
On Ubuntu 16.04, pre-installing cpanminus, MongoDB Perl Driver and Mojo::File allows for a clean install of NMIS9:
Release 9.0.4 of NMIS introduces the smarter non-interactive installation mode.
*CentOS 8 support has been withdrawn due to CentOS 8 being end of maintenance on 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.
...
FirstWave Installer
...
Some notes that are common for all Opmantek FirstWave Applications:
- The Opmantek FirstWave installer can can be preseeded before the installer is invoked.
- On CentOS and RHEL, always check the status of firewalld and selinux when unable to connect via http |or https. During the installation, the installer prompts for disable selinux and temporarily stops firewalld.
opConfig
opConfig Documentation.
...
- to disable selinux.
Open-AudIT
...
Open-AudIT Documentation
Product | Product Version |
---|
Database |
---|
Operating |
---|
(bold: recommended)
Systems | Notes |
---|---|
Open-AudIT | >= |
5.0 |
opConfig 2.2.0 won't be able to report config
changes to NMIS if you run it with NMIS 8.5.10G
To provide compatilibity with MongoDB 2.4 you have to set the
configuration option db_use_v26_features to "false" or 0 (in conf/opCommon.nmis)
MariaDB |
| 64bit systems only. More information. |
opConfig
...
opConfig Documentation
opConfig 4.X compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes | |||
---|---|---|---|---|
opConfig | >= 4.0.0 | >= 9.0.0 | 3.4 | NMIS needs to be installed but doesn't need to be running. Please check the opConfig 4 release notes for a specific NMIS minor version requirement. |
Status | ||||
---|---|---|---|---|
|
opHA
opHA Documentation.
opHA 2.X Compatibility list:
...
NMIS Version
...
opHA 2.1.2 won't be able to transfer NMIS event statuses
if you run it with NMIS 8.5.10G
opConfig | >= 4.1.1 | >= 9.1.0 | 3.4 | |
opConfig | >= 4.3.0 | >= 9.2.4 | 3.4, 3.6 | |
opConfig | >= 4.4.0 | >= 9.4.0 | 3.4, 3.6, 4.2 | |
opConfig | >= 4.6.0 | >= 9.5.0 | 4.2, 6.0 |
...
opHA 3.X Compatibility list:
NMIS Version
(bold: recommended)
Status | ||||
---|---|---|---|---|
|
...
opHA
opEvents Documentation.
...
opHA Documentation
opHA 3.X, 4.X
Compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes |
---|
opHA |
>= 3. |
0. |
0 | >= |
9. |
0.0 |
3.4 |
configuration option
db_use_v26_features
to "false" or 0 (in conf/opCommon.nmis
)...
Please check the opHA 3 release notes for a specific NMIS minor version requirement. | ||||
opHA | >= 3.1.2 | >= 9.1.0 | 3.4 | |
opHA | >= 3.4.0 | >= 9.2.4 | 3.4, 3.6 | |
opHA | >= 3.5.0 | >= 9.4.0 | 3.4, 3.6, 4.2 | |
opHA | >= 4.1.0 | >= 9.5.0 | 4.2, 6.0 |
Status | ||||
---|---|---|---|---|
|
opEvents
...
opEvents Documentation
opEvents 3.X, 4.X Compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes | |||
---|---|---|---|---|
opEvents | >= 3.0.0 | >= 9.0.0 | 3.4 | opEvents 3.X NMIS needs to be installed but doesn't need to be running. Please check the |
opEvents 3 Release Notes for a specific NMIS minor version requirement. |
Status | ||||
---|---|---|---|---|
|
opCharts
opCharts Documentation.
opCharts 2.X & 3.X Compatibility list:
...
NMIS Version
...
opEvents | >= 3.1.0 | >= 9.1.0 | 3.4 | |
opEvents | >= 4.1.0 | >= 9.2.4 | 3.4, 3.6 | opEvents 4.X NMIS needs to be installed but doesn't need to be running. Please check the opEvents 4 Release Notes for a specific NMIS minor version requirement. |
opEvents | >= 4.2.0 | >= 9.4.0 | 3.4, 3.6, 4.2 | |
opEvents | >= 4.4 |
...
opCharts 4.X Compatibility list:
NMIS Version
(bold: recommended)
.0 | >= 9. |
5.0 |
4.2, 6.0 |
Status | ||||
---|---|---|---|---|
|
...
opCharts
...
opReports opCharts Documentation.
opReports 3.X Compatibility list:
...
NMIS Version
...
opCharts
...
4.X Compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes |
---|
opCharts | >= 4.0. |
0 | >= 9.0. |
0 | 3.4 | Please check the |
opCharts 4 release notes for a specific NMIS minor version requirement. |
Status | ||||
---|---|---|---|---|
|
opFlow
opFlow Documentation
opCharts | >= 4.1.3 | >= 9.1.0 | 3.4 | |
opCharts | >= 4.3.0 | >= 9.2.4 | 3.4, 3.6 | |
opCharts | >= 4.4.0 | >= 9.4.0 | 3.4, 3.6, 4.2 | |
opCharts | >= 4.8.0 | >= 9.5.0 | 4.2, 6.0 |
NMIS Version
(bold: recommended)
Status | ||||
---|---|---|---|---|
|
Open Audit
...
opReports
...
opReports Documentation
opReports 4.X Compatibility list:
Product | Product Version | NMIS Version |
---|
Operative
Systems
MongoDB Version (bold: recommended) | Notes | |
---|---|---|
opReports | >= 4.0.0 | >= 9.0.11 |
N/A |
- Windows 7 and up
- RedHat / CentOS 6 and up
- Debian 8 and up
- Ubuntu 14.04 and up
opExport
opExport Documentation.
Please check the opReports release notes for a specific NMIS minor version requirement. | ||||
opReports | >= 4.1.1 | >= 9.1.0 | N/A | |
opReports | >= 4.3.0 | >= 9.2.4 | N/A | |
opReports | >= 4.4.0 | >= 9.4.0 | N/A | |
opReports | >= 4.6.0 | >= 9.5.0 |
NMIS Version
(bold: recommended)
N/A |
Status | ||||
---|---|---|---|---|
|
...
opAddress
...
opAddress Documentation
opAddress 2.X Compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes |
---|
opAddress | >= 2.0.0 | >= 9 |
.2.1 | 3.0 - 3.4 | |
opAddress | >= |
2. |
1. |
0 |
>= |
9. |
2.4 |
opTrend's config optrend_process_condition_in_nmis
must
be disabled if you run this version with NMIS 8.5.10G
Status | ||||
---|---|---|---|---|
|
opAddress
opAddress Documentation.
3.4, 3.6 | ||||
opAddress | >= 2.2.0 | >= 9.4.0 | 3.4, 3.6, 4.2 | |
opAddress | >= 2.4.0 | >= 9.5.0 | 4.2, 6.0 |
NMIS Version
(bold: recommended)
Status | ||||
---|---|---|---|---|
|
...
opFlow
...
opFlow Documentation
opFlow 4.X Compatibility list:
Product | Product Version | NMIS Version |
---|
MongoDB Version (bold: recommended) | Notes |
---|
opFlow |
>= 4. |
0. |
0 | >= |
9.4. |
use_json
is nonexistent or set to false6 | 4.2 | ||
opFlow | >= 4.1.0 | >= 9.5.0 | 6.0 |
Status | ||||
---|---|---|---|---|
|
...
Operating Systems please check the NMIS version compatibility list.