You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 107 Next »

The table below describes which combinations of Opmantek products are tested and work well with what versions of NMIS 9 and MongoDB.

For earlier products please see Product Compatibility NMIS 8.

 NMIS


NMIS Documentation

NMIS 9 Release Notes

NMIS 9 compatibility list: 

Product

Product Version

MongoDB Version
(bold: recommended)

Operating 
Systems

Notes
NMIS>= 9.0.03.4, 3.6
  • Debian 9, 10*
  • Ubuntu 18, 20
  • CentOS 7**
  • RHEL 7
  • RHEL 8

RHEL 8 is supported from NMIS version 9.2.1

If install of NMIS 9 fails due to failure to install package WWW::Mechanize, pre-install WWW::Mechanize before installing NMIS:

sudo yum install -y perl-CPAN;
sudo yum install -y perl-App-cpanminus;
sudo cpanm WWW::Mechanize --sudo --notest;



NMIS>= 9.4.03.4, 3.6, 4.2

Release 9.0.4 of NMIS introduces the smarter non-interactive installation mode.

*Should Debian 10 install fail with this error, 'The following signatures couldn't be verified because the public key is not available: NO_PUBKEY', please run the following commands to install the needed GPG Keys and reinstall:

sudo -i
type wget >/dev/null 2>&1 && GIMMEKEY="wget --tries=5 -q -T 20 -O - https://ftp-master.debian.org/keys/archive-key-8.asc" || GIMMEKEY="curl --retry 4 -L -s -m 20 https://ftp-master.debian.org/keys/archive-key-8.asc";
$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -;

**CentOS 8 support has been withdrawn due to CentOS 8 being end of maintenance on 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.centos.org/About/Product

 Opmantek Installer


Some notes that are common for all Opmantek Applications: 

  • The Opmantek installer can be preseeded before the installer is invoked.
  • On CentOS and RHEL, always check the status of firewalld and selinux when unable to connect via http|https. During the installation, the installer prompts to disable selinux.

 Open-AudIT


Open-AudIT Documentation

Open-AudIT Release Notes

Earlier versions of Open-AudIT integrate with NMIS8.

ProductProduct VersionDatabase

Operating
Systems

Notes
Open-AudIT>= 4.1 MariaDB
  • Windows Server 2016 and up (not compatible with Windows 10)
  • CentOS 7**
  • RHEL 7
  • RHEL 8
  • Debian 9 and up*
  • Ubuntu 18.04 and 20.04

64bit systems only. More information.

*Should Debian 10 install fail with this error, 
'The following signatures couldn't be verified because the public key is not available: NO_PUBKEY',
please run the following commands to install the needed GPG Keys and reinstall:

sudo -i
type wget >/dev/null 2>&1 && GIMMEKEY="wget --tries=5 -q -T 20 -O - https://ftp-master.debian.org/keys/archive-key-8.asc" || GIMMEKEY="curl --retry 4 -L -s -m 20 https://ftp-master.debian.org/keys/archive-key-8.asc";
$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -||$GIMMEKEY | apt-key add -;

**CentOS 8 is not supported due to CentOS 8 being end of maintenance in 31 Dec 2021, your CentOS target should be CentOS 7 https://wiki.centos.org/About/Product


 opConfig


opConfig Documentation

opConfig Release Notes

opConfig 4.X compatibility list: 

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)
Notes
opConfig>= 4.0.0>= 9.0.0 3.4

NMIS needs to be installed but doesn't need to be running. 

Please check the opConfig 4 release notes for a specific NMIS minor version requirement. 

opConfig>= 4.1.1>= 9.1.03.4
opConfig>= 4.3.0>= 9.2.43.4, 3.6

opConfig

>= 4.4.0>= 9.4.03.4, 3.6, 4.2

! For a list of compatible Operating Systems please check the NMIS version compatibility list

 opHA


opHA Documentation

opHA Release Notes

opHA 3.X Compatibility list: 

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)
Notes
opHA>= 3.0.0 >= 9.0.03.4

Please check the opHA 3 release notes for a specific NMIS minor version requirement. 

opHA>= 3.1.2>= 9.1.03.4
opHA>= 3.4.0>= 9.2.43.4, 3.6
opHA

>= 4.4.0

>= 9.4.03.4, 3.6, 4.2

! For a list of compatible Operating Systems please check the NMIS version compatibility list

 opEvents


opEvents Documentation

opEvents Release Notes

opEvents 3.X Compatibility list: 

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)
Notes
opEvents>= 3.0.0 >= 9.0.03.4

NMIS needs to be installed but doesn't need to be running. 

Please check the opConfig 4 release notes for a specific NMIS minor version requirement. 

opEvents>= 3.1.0>= 9.1.03.4
opEvents>= 4.1.0>= 9.2.43.4, 3.6
opEvents>= 4.2.0>= 9.4.03.4, 3.6, 4.2

! For a list of compatible Operating Systems please check the NMIS version compatibility list

 opCharts


opCharts Documentation

opCharts Release Notes

opCharts 4.X Compatibility list: 

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)
Notes
opCharts>= 4.0.0>= 9.0.03.4

Please check the opCharts 4 release notes for a specific NMIS minor version requirement. 

opCharts>= 4.1.3>= 9.1.03.4
opCharts>= 4.3.0>= 9.2.43.4, 3.6
opCharts>= 4.4.0>= 9.4.03.4, 3.6, 4.2

! For a list of compatible Operating Systems please check the NMIS version compatibility list

 opReports


opReports Documentation

opReports Release Notes

opReports 4.X Compatibility list: 

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)
Notes
opReports>= 4.0.0 >= 9.0.11N/A

Please check the opReports release notes for a specific NMIS minor version requirement. 

opReports>= 4.1.1>= 9.1.0N/A
opReports>= 4.3.0>= 9.2.4N/A
opReports>= 4.4.0>= 9.4.0N/A

! For a list of compatible Operating Systems please check the NMIS version compatibility list

 opAddress


opAddress Documentation

opAddress Release Notes

opAddress 2.X Compatibility list: 

ProductProduct Version

NMIS Version

MongoDB Version
(bold: recommended)
Notes
opAddress>= 2.0.0>= 9.2.13.0 - 3.4
opAddress>= 2.1.0>= 9.2.43.4, 3.6
opAddress>= 2.2.0>= 9.4.03.4, 3.6, 4.2

! For a list of compatible Operating Systems please check the NMIS version compatibility list

  • No labels